Home > HARDWARE > BUILDERS HARDWARE > HINGES
Choose a sub category:
DOOR HINGES BLANK HINGES SPRING HINGES
GRAVITY PIVOT HINGES CONTINUOUS HINGES UTILITY HINGES
STRAP HINGES TEE HINGES / T-HINGE HOOK/STRAP HINGES
Sort By:
1 2 3 ... 17
HINGE NRW ZINC PLATED 1IN     HINGE NRW ZINC PLATED 1-1/2IN HINGE NRW ZINC PLATED 1-1/2IN
518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose. 518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose. 518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.
T-HINGE ZINC PLATED 2IN       HINGE NRW ZINC PLATED 2IN     HINGE STRAP ZINC PLATED 3IN
T HINGES 2IN ZN PLT
Our Price: $1.79
STRAP HINGES 3IN ZN PLT
Our Price: $1.99
Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack. 518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose.
National Hardware 284BC Flush/Full Inset Light T Hinge HINGE NRW ZINC PLATED 2-1/2IN T-HINGE ZINC PLATED 4IN
T HINGES 3IN ZN PLT
Our Price: $1.99
T HINGES 4IN ZN PLT
Our Price: $2.59
National Hardware T Hinge, Flush/Full Inset, Light, Series: 284BC, 6 Holes, 0.21 in Hole Diameter, 0.056 in Leaf Thickness, 3 in Door Leaf Length, 0.69 in Frame Leaf Length, 2.24 in Frame Leaf Width, 0.17 in Diameter Pin, Aluminum Pin, Wall Mounting, Fasteners: NO 6 Flat Headed Screw, 18 lb Load Capacity, 2.34 in Overall Width, Hot Rolled Steel 518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack.
HINGE UTILITY STEEL 2X2IN ZN  HINGE UTL STL ZN PLTD 1INX1IN HINGE UTILITY SQ CNR 2X1-1/2IN
Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included. Lightweight steel construction. 3 Knuckles. Lightweight steel construction. 3 Knuckles.
Mintcraft 20347ORX Door Hinge Stanley 830226 Door Hinge Stanley 830229 Door Hinge
2.2mm thickness, 5-knuckle, loose pin. Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Screws included. Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation.
Stanley 830232 Door Hinge National Hardware SPB512RC Round Corner Door Hinge National Hardware N830-268 Square Corner Door Hinge
Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation or removal of doors. National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512RC, Knuckle Bearing, 6 Holes, 3 in Door Leaf Length, 3 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3 in Overall Width, Steel, Brass Tone, BHMA A138.18, For Interior Residential Doors National Hardware Door Hinge, Full Mortise, Square Corner, Series: SPB512, Knuckle Bearing, 3 in Door Leaf Length, 3 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3 in Overall Width, Steel, Brass Tone, BHMA A138.18, For Interior Residential Doors
HINGE DOOR BRASS TNE 3IN      HINGE NRW ZINC PLATED 3IN     HINGE UTL SQ CNR ZN STL 1X1IN
Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. 518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose. Five knuckle full mortise design. Allows easy installation or removal of lightweight cabinet doors. Screws included.
HINGE UTL ZN PLT 1-1/2X1-3/8IN HINGE STRAP STEEL LD 2IN ZINC T-HINGE LD STEEL 2IN ZINC PLTD
Lightweight steel construction. 3 Knuckles. Use in both the interior and exterior. Screws included. For use on tool boxes, storage chests and small shed doors.
Mintcraft 20347SNX Door Hinge HINGE DOOR (HPCE) ZN 3IN      HINGE DOOR (HPCE) ZN 3IN
2.2mm thickness, 5-knuckle, loose pin. Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation.
HINGE STRAP ZINC PLATED 5IN   T-HINGE ZINC PLATED 5IN       Mintcraft 20347ST4C Door Hinge
STRAP HINGES 5IN ZN PLT
Our Price: $3.29
T HINGES 5IN ZN PLT
Our Price: $3.29
Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose. Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack. 2.2mm thickness, 5-knuckle, loose pin.
   
 
1 2 3 ... 17