Home > HARDWARE > CONSTRUCTION HARDWARE > JOIST HANGERS & CONNECTORS > MISC CONSTR HARDWARE
Sort By:
1
HARDWARE KIT WORKBENCH&SHELVNG Deckmate 90166 Deck Bench Bracket with Bench Bracket Hopkins 90110 Comfortable Flip Top Bench Table
The WBSK workbench and shelving hardware kit provides the connectors and connector fasteners to build a workbench or shelving unit. The kit features the Simpson Strong-Tie? Rigid Tie? RTC2Z corner connector that makes it easier to make strong and durable corner connections with 2 x 4 lumber using no angle cuts or bolts. Each kit contains enough RTC2Z connectors to construct one workbench. Two kits are necessary to build a four-shelf unit. With the WBSK kit, a professional quality project can be customized and completed in a couple of hours. You determine the size. Connect with railing brackets with 2x4 and 2x6 lumber to easily add a bench to any size or shape deck. Gain increased seating area while using only 7 in of deck space. Assembled unit stands 36 in H for deck railing, seat is 17 in H. Quick and easy to assemble using basic tools. Includes bench bracket, hardware and instructions. Lumber not included. Make a comfortable, sturdy bench and a table up to 8 ft long. Just add 2x4 lumber pieces. Flips and locks from a bench to a table in seconds without using tools. Slide lock safely secures and locks in position. Made of maintenance-free structural resin. Use only one or slide two Bench Tables together for a full size picnic table. Good for small porches and decks. Assembled unit stands 34 in H in the bench position, 31 in H in the table position and both with 17-1/2 in H seat. Includes Bench Table legs, hardware and instructions. Lumber not included.
Hopkins 90158 Workbench Kit BRG PLATE SLTD ZMAX 5/8X9/64IN REPLACEMENT MANDREL 7-1/2IN
Create a workbench, worktable or power tool stand. Add 2x4's plywood or particleboard to make a workbench, worktable or power tool stand in any length or width up to 8 ft L x 4 ft W. Simple assembly in less than an hour with only powered screwdriver and a saw. Only straight, 90 deg cuts required, no miter or angles. Made of structural resin. Kit includes: 4 legs, hardware and instructions. Lumber and shelf links not included. Bearing plates give greater bearing surface than standard-cut washers and help distribute the load at these critical connections. The LBPS are bearing plates that offer increased flexibility while meeting the latest requirements of the code for 2 x 4 and 2 x 6 walls. The slotted hole allows for adjustability to account for bolts that are not in the middle of the sill plate. Keep your Quik Drive auto-feed screw driving system in ideal condition with these Simpson Strong-Tie? replacement parts.
TENSION TIE HEAVY GALV 16IN   COUPLER NUT ZINC PLATED 3/4IN
The HTT is a high-strength solution for resisting tension loads in post-pour, wood-to-concrete connections. This heavy, single-piece formed tension tie is fastened with nails or Strong-Drive? SD Connector screws. The HTT has a four-ply formed seat and a design without rivets that does not require washers. The CNW is designed to connect threaded rods to one another and to anchor bolts. These coupler nuts are designed to exceed the specified minimum tensile capacity of the corresponding bolts and threaded rod. All CNW coupler nuts feature a positive stop to help ensure even threading into each end of the nut and a Witness? hole as a means to verify when rods are properly installed.
   
 
1