Home > ELECTRICAL > LIGHTING & CEILING FANS > LIGHT FIXTURES > LIGHTING - RECESSED
Sort By:
1 2
Halo 401P Open Recessed Light Trim FIXT RCSD CEIL WH SF RING     Halo 301P Open Recessed Light Trim
Open in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings. Coilex tapered plastic baffle-trim with self-flange in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings. Open recessed  trim ring, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381) and SHALLOW H27T (989.1672). Sleeved.
Halo H7ICT Recessed Housing Halo H7ICAT Recessed Housing Halo 5000P Open Splay Trim
"For use with 120 volt Incandescent lamps. Aluminum construction for greater heat dissipation. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2"" knockouts. Slide-N-Slide connectors allow non-metallic sheathed cable to be installed without removing knockouts. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24"" joist span. Can be field shortened for 12"" joist.  Installation: 7-1/2"" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 2"" thick. Requires 6-1/2"" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated." The H7 recessed housing is the standard in the industry for both commercial and residential applications. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. H7ICAT is for installations where the housing will be in direct contact with insulation and also meet restricted air flow requirements. Diameter of 6-1/2", white trim for use with 5" incandescent rounds. Non-insulated or insulated housings. 75 watt maximum. Bulb sold separately. For use with 5" housings: Halo model numbers (Orgill SKU numbers), H5T (424.1535), H5ICAT (651.3956) and H5RT (635.6182).
TRIM FIXT FULL BFFL WH/BLK 6IN Halo 300P Open Recessed Light Trim Halo H750ICAT Recessed Housing
Full cone baffle-trim with self-flange in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings. Open trim with socket support in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings. The H750ICAT is a dedicated LED new construction housing for use with halo H7 collection 600 Series and 900 Series LED modules. The H750ICAT is designed for insulated ceilings and can be in direct contact with ceiling insulation. This AIR-TITE? housing design prevents airflow between attic and living areas and saves on both heating and air conditioning costs. The H750ICAT connector system provides high efficacy code compliance when used with Halo H7 collection LED modules.
Coilex Halo 410W Baffle Trim Halo 70PS Recessed Light Shower Trim Halo 30WAT Super Recessed Light Fixture Trim
White trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815) and H7RT (942.0381). Wet location and AIR-TITE listed white trim with frosted Albalite Lens. 8" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381), and SHALLOW H27T (989.1672). Sleeved. Air-Tite? baffle trim with reflector 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
Halo 5001P Splay Baffle Trim Coilex Halo 310W Baffle Trim Halo H7 Remodel Recessed Housing
Metal baffle trim for use with the H5 Series housings. Trim includes dual-position socket supports for BR, R and PAR lamps. Coilex? baffle trim in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings. The H7 family of recessed housings are the standard in the industry for both commercial and residential applications. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. The H7RICT is designed for installations where the housing will be in direct contact with insulation. H7RICT may be converted into Air-Tite? installation when used with Air-Tite? trims.
Halo 78P Eyeball Recessed Light Trim DWNLT IND RCSD 3000K LED 4IN  Coilex Halo 993W Ring Baffle Trim
Eyeball 30 deg tilt, self-flanged in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings. Ideal as an energy-saving retrofit solution, but also suitable for new construction and remodeling installations, the LT4 is an LED baffle trim module for use in 4 in aperture recessed downlights. The downlight is UL certified for use with HALO and other compatible housings and the precision construction makes any housing airtight for added HVAC savings and code compliance. A wide distribution makes the LT4 ideal for general and task lighting. Coilex? baffle trim for 4 in H99 incandescent family and H470 CFL family of recessed housings. Die-cast trim ring is available in a variety of finishes. Polymer Coilex? baffle is available in white and black. Three cat's paw springs secure trim in housing.
Halo H99TAT Recessed Housing Halo H750RICAT Remodel Recessed Housing Halo H5ICAT Recessed Housing
The H99TAT is a small aperture Non-IC AIR-TITE? housing for providing accent and task lighting. The H99TAT is designed for use in non-insulated ceiling or for insulated ceilings but insulation must be kept 3 in from all sides of the housing. Non-IC Housing is AIR-TITE? but insulation must be kept 3 in away from all sides of housing. The H750RICAT is a dedicated LED Remodel housing for use with Halo H7 Collection 600 900 Series LED modules. The H750RICAT is designed for remodel into insulated ceilings and can be in direct contact with ceiling insulation. This AIR-TITE? housing design prevents airflow between attic and living areas and saves on both heating and air conditioning costs. The H750RICAT LED connector system provides high efficiency code compliance when used with Halo H7 Collection 600 and 900 Series LED modules. The Halo H5 Series is designed to accommodate smaller sized PAR20 and PAR30 halogen lamps. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. The H5ICAT is designed for use in insulated ceiling applications. This is an Air-Tite? housing and may be used to meet restricted air flow requirements.
LIGHT CEIL RCSD RTFT 600L 4IN LGHT CEIL RCSD LED 600L WH 4IN LGHT CEIL RCSD LED 600L WH 6IN
Recessed downlight. 5 selectable colors, 2700K, 3000K, 3500K, 4000K and 5000K. 70000 hours average life. UL Certified, Energy star. LED surface mount downlight. Dimmable, showerlight. Fits most J-boxes and recessed housings. 3000K, 50000 average life hours. Halo BLD6 Recessed Lighting Trim, Lumens: 800 Lumens, Recessed Can Diameter: 6 in, White, Temperature Rating: 3000 K, Includes: Torsion Spring
Halo 426 Specular Reflector Cone Coilex Halo 993P Ring Baffle Trim 53809111 LIGHT DOWN 450L 3IN
Reflector cone in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings. Coilex? baffle trim for 4 in H99 incandescent family and H470 CFL family of recessed housings. Die-cast trim ring is available in a variety of finishes. Polymer Coilex? baffle is available in white and black. Three cat's paw springs secure trim in housing. ETI Edge-Lit Downlight, 120 V, 8.5 W Wattage, Dimmable, Triac Ballast, 50,000 hr Average Life, 450 Lumens , 2700, 3000, 4000, 5000 K Color Temperature, Recessed Can Diameter: 3 in, Dimmable , -13 to 104 deg F
53808211 LIGHT DOWN 650L 4IN  Halo RL560WH-R Retrofit Baffle Trim Halo H99RTAT Recessed Housing
ETI Edge-Lit Downlight, 120 V, 11 W Wattage, Dimmable, Triac Ballast, 50,000 hr Average Life, 650 Lumens , 2700, 3000, 4000, 5000 K Color Temperature, Recessed Can Diameter: 4 in, Dimmable , -13 to 104 deg F The Halo RL56 Series is a complete LED Baffle-Trim Module for 5 in and 6 in aperture recessed downlights. RL56 is designed for use in new construction, remodel and retrofit installation in Halo, All-Pro and other compatible 5 and 6 in housings. The integral LED driver offers 120 V dimming capability. The RL56 lens provides uniform illumination and wet location listing. Precision designed to make any housing Air-Tite? for added HVAC savings and code compliance. The H99RTAT is a small aperture Non-IC AIR-TITE? housing for providing accent and task lighting. The H99RTAT is designed for use in non-insulated existing ceilings. Non-IC Housing is AIR-TITE? but insulation must be kept 3 in away from all sides of housing. For installation from below the ceiling.
   
 
1 2