Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE FITTINGS > BRASS COMPRESSION FITTINGS
Choose a sub category:
BRASS COMPRESSION SLEEVES BRASS COMPRESSION UNIONS BRASS COMPRESSION INSERTS
BRASS COMPRESSION CAPS BRASS COMPRESSION NUTS BRASS COMPRESSION ADAPTERS
BRASS COMP MALE CONNECTORS BRASS COMP FEMALE CONNECTORS BRASS COMPRESSION TEES
BRASS COMPRESSION ELBOWS
Sort By:
1 2 3 4
Anderson Metals P60P Tube Sleeve Anderson Metals P60P Tube Sleeve Anderson Metals P60P Tube Sleeve
Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. For ID copper tube size, reduce OD size by 1/8 in. Easy to disassemble, no flaring tool required. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. For ID copper tube size, reduce OD size by 1/8 in. Easy to disassemble, no flaring tool required. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. For ID copper tube size, reduce OD size by 1/8 in. Easy to disassemble, no flaring tool required.
Anderson Metal 730561-05 Brass Compression Fitting Anderson Metal 730561-04 Brass Compression Fitting Anderson Metal 730561-08 Brass Compression Fitting
Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines. Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines. Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines.
Anderson Metals PLF 760 Compression Sleeve Anderson Metals PLL 760 Compression Sleeve Anderson Metals PLF 760 Compression Sleeve
Anderson Metals Pipe Sleeve, Nominal Size: 1/4 in, Compression Connection, 300 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines. Anderson Metals Pipe Sleeve, Nominal Size: 3/16 in, Compression Connection, 400 psi, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing
Anderson Metals PLL 760 Compression Sleeve BRASS INSERT/DELRIN SLEEVE 1/4 Anderson Metal 730561-10 Brass Compression Fitting
Anderson Metals Pipe Sleeve, Nominal Size: 3/8 in, Compression Connection, 200 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines. Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines.
BRASS INSERT/DELRIN SLEEVE 3/8 COMPRESSION SLVE/INSERT 5/16IN Anderson Metals 50868-0402 Tube Adapter
Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines. Anderson Metals Compression Stiffener and Sleeve, Nominal Size: 5/16 in Anderson Metals Pipe Adapter, Nominal Size: 1/4 x 1/8 in, Compression x MPT Connection, Brass, Suitable for: Plastic Tubing
Anderson Metal 730561-06 Brass Compression Adapter Insert COMPRESSION SLEEVE/INSRT 1/2IN Anderson 750066-0302 3-Piece Reducing Tubing Coupling
Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines. Anderson Metals Compression Stiffener and Sleeve, Nominal Size: 1/2 in, Suitable for: 1/2 in OD Plastic Tube Three-piece construction, nut, sleeve and body. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. UPC individually bagged.
COMPRESSION SLEEVE/INSRT 5/8IN Anderson Metal 750068-0602 Brass Fitting Anderson Metals 730061-10 Compression Nut
Anderson Metals Compression Stiffener and Sleeve, Nominal Size: 5/8 in, Suitable for: 5/8 in OD Plastic Tube Three piece construction, nut, sleeve and body with attached insert. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines.
Anderson Metal 750097-0604 Brass Flare  Adapter Anderson 750066-0606 3-Piece Tubing Coupling Anderson Metals P60P Tube Sleeve
Anderson Metals Tube Adapter, Nominal Size: 1/4 x 3/8 in, Compression Connection, 300 psi, Brass Anderson Metals Pipe Connector, Nominal Size: 3/8 in, Compression x Female Connection, 200 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. For ID copper tube size, reduce OD size by 1/8 in. Easy to disassemble, no flaring tool required.
Anderson Metal 750068-0406 Brass Fittings Anderson Metal 750097-0806 Brass Adapter Anderson Metal 750065-05 Brass Compression Elbow
Three piece construction, nut, sleeve and body with attached insert. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. Anderson Metals Tube Adapter, Nominal Size: 1/2 x 3/8 in, Compression Connection, Thread Type: Straight, 200 psi, Brass Anderson Metals Tube Union Elbow, Nominal Size: 5/16 in, Angle: 90 deg, 300 psi, Operating Temperature: -65 to 250 deg F, Brass
Anderson 750066-0406 3-Piece Tubing Coupling Anderson 50869-0402 Tube Elbow Anderson Metal 750068-0408 Brass Fittings
Three-piece construction, nut, sleeve and body. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. UPC individually bagged. Anderson Metals Tube Elbow, Nominal Size: 1/4 x 1/8 in, Angle: 90 deg, 400 psi, Brass Three piece construction, nut, sleeve and body with attached insert. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil and vacuum lines.
   
 
1 2 3 4