Home > LAWN & GARDEN > FARM SUPPLIES > ELECTRIC FENCING & SUPPLIES
Sort By:
1 2 3 ... 6
Zareba MP-1933 Electric Fence Insulators Zareba MP-1929 Electric Fence Insulators Fi-Shock GHPO-FS Electric Fence Gate Handles
Small screw-in insulator. Large screw-in insulator. Molded of tough, high quality plastic with shockproof thickness for safe handling protection.
Fi-Shock PAHTS-FS Polytape Splicer GROUND CLAMP HEAVY DUTY 10/CS Fishock A-48B Fence Post
For splicing polytape up to 1/2" wide. Allows for fast, secure joining of polytape rolls. Connects one polytape to another without losing juice. For a secure connection between ground wire and ground rod. Heavy duty construction. Made of aluminum; will not rust. For use with 5/8" and larger ground rods. 1 clamp per pack. Model clips hold electric fence wire and polytape (up to 2" wide). Molded of reinforced polypropylene with a heavy-duty steel stake. Extra reinforcing ribs for strength. Features large step-in flange and anti-rotation spike to keep stake from turning. Includes 8 wire holders.
Fishock A-48 Step-In Fence Post Fi-Shock ICY-FS Electric Fence Insulators Zareba ICRY-RS/YCP10 Standard Corner Post Insulator
Heavy duty fence post keeps your property protected. Molded clips to hold electric fence wire and poly tape (up to 2" wide. Each 4' post molded from reinforced polypropylene with a heavy-duty steel stake. For firmly securing an electrified wire to corner posts without losing energy through the post. Formed of thick, tough plastic. Can withstand the strain of wire at corner of electrified fence. For 9-22 gauge high-tensile steel wire and aluminum wire, all polywire (regular and heavy duty), and polyrope up to 1/4" in diameter. Can use on chain link fence. Made of virgin, high impact polyethylene. To be used with lightweight smooth wire or Red Snap'r electric fence wire (install after insulator is attached to post). Fastener snaps open and shut for easier wire installation.
Zareba ICY-RS/YTRC10 Red SnapR Electric Fence Insulators Fi-Shock WC-100 Fence Wire Fi-Shock PARS-FS Polyrope Connector
Made of virgin, high impact polyethylene. Designed for quick, easy installation. For use with heavy gauge wire and barbed wire. 125 to 145 Breaking Load Limit. For splicing together 1/4" polyrope. Allows for fast, secure joining of polyrope. Can also be used to make electrical connections between fence lines and the fence charger.
Fi-Shock PAHTE-FS Polytape End Connector Zareba HT4FT125/500-540T Electric Fence Insulators Fi-Shock AWPA-FS Electric Fence Gate Handle Anchors
Connects 1/2" polytape to another without losing power so you can reach distant electric fence posts. Use at the ends of polytape for dead-ending or gate handle connections. Ridged design enables the staple to lock without penetrating insulator profile. Made of non-conductive polyethylene. Anchoring gate handles. This insulated anchor is to be used in conjunction with the gate handle. The screw-in design type is for wood gate posts.
Fi-Shock GHRY-FS Electric Fence Gate Handles Parker Mccrory 716 Step-In Posts Fi-Shock PA1TS-FS Polytape Buckle Splicer
Use with fence wire and polyrope. Insulates against shock. Super tough fiberglass reinforced electric fence post. Unique step-in design with adjustable insulators that can be used with Baygard wire, Bayshock wire or Baygard HV tape. Designed for improved strength. Complete with 4 versatile insulators that can accept wire, tape and rope. Weather resistant. Non conductive and lightweight. Connects 1" polytape to the end insulators to reach all of your fence posts.
Fi-Shock ITY-FS Electric Fence Insulators Fi-Shock PATE-FS Polytape to Energizer Connector Zareba HTTT/300-309 Electric Fence Wire Bending Tool
Standard, snug fitting T-post insulator. For fastening electrified wire to the post without losing energy through the post. Fits securely on standard (1.25 or 1.33) studded T-posts. One molded piece; needs no hardware. Yellow. Bag of 25. For connecting a fence charger to polytape. This clamp connects the fence charger connects the fence charger to polytape anywhere in the fence line where an electrical connector plate is inaccessible.  Connects the polytape to the energizer. Used to wrap MG spacer clips No.400-430T to wire while securing poly spacer posts No.200-260. Also used for twisting 12.5, 11 and 9-gauge wire.
Fi-Shock ATPA-FS Electric Fence Gate Handle Anchors Fi-Shock ICDB-FS Electric Fence Insulators Zareba WS3 Warning Sign
For anchoring gate handles. This insulated anchor is to be used in conjunction with the fence gate handle. The screw-in design is for T-post gate posts. High strain corner and end insulator. For firmly securing and electrified wire to corner or end posts without losing energy through the post. Made for high tensile, permanent or temporary electric fences. Can withstand the strain of wire at corner or ends of electrified fences. Black letters on a yellow polypropylene background. Two holes for fastening to fence wire or nailing to wood post. 3 signs. "Warning! Electric Fence" printed in English, French and Spanish languages.
Fi-Shock PA2TS-FS Polytape Splicer Petsafe RFA-35-11 Lithium Battery Zareba A1LVT-Z Electric Fence Tester
Connects 2" polytape to the end insulators to reach all of your fence posts. Battery for the following receivers: Deluxe Big Dog Remote Trainer -PDBDT-305, Deluxe Little Dog Remote Trainer - PDBDT-305, Instant Fence Receiver - IF-200, Ultralight Receiver - UL-250, Deluxe Ultralight Receiver - UL-275, Deluxe Big Dog Remote Trainer - DBDT-204, and Deluxe Little Dog Remote Trainer - DLDT-204. Checks current in electric fence with a one-light application. Has a plastic case with 42'' of plastic coated cord.
Fi-Shock PATT-FS Polytape To Polytape Connector Fi-Shock FW-00018D Electric Fence Wire Fi-Shock PAWPC-FS Electric Fence Insulators
For connecting strands of polytape. Simplifies electrical connections between strands of polytape. Stainless steel plate holds the tape securely and will not corrode. 90 Pound Breaking Load Limit. Lightweight. Rust-proof. For insulating corner wood posts that have polytape. Made for all poly tape widths up to 2". For standard T-posts (1.25 and 1.33). Use at corners, ends or T-junctions. Fully insulated. All metal parts are stainless steel. Molded of high density polyethylene with UV inhibitors.
   
 
1 2 3 ... 6