Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > GRINDING/ CUT-OFF WHEELS & ACC > CUT-OFF WHEELS - METAL > 3 INCH OR SMALLER WHEELS
Sort By:
1
Gemini 66252835553 Type 1 Grinding Wheel Weiler 36533 Cut-Off Wheel WHEEL CUT-OFF T1 3X1/16X3/8IN
Get a consistent performance quality and impressive bang for your buck out of this Gemini A AO-type 01/41 small diameter cut-off wheel <=3. Its high-quality aluminum oxide grain produces a versatile abrasive face that's ideal for both tough cuts through hard carbon steels and for precise incisions into softer alloys. This wheel's ultra-thin side reinforcing helps you make a straight, thin cut without encumbering the cutting edge. Ideal for 400 Series stainless steel, this cutting wheel works from either your portable cut-off tool or a handheld power drill for maximum convenience. Aluminum oxide grain for fast cutting speed and easier hard metal cutting. Cut through a range of materials with this Clipper Classic A AO type 01/41 small diameter <= 3 in cut-off wheel for your portable cut-off tool or power drill. The all-purpose bond and aluminum oxide abrasive ensure the wheel performs consistently on 400 Series stainless, as well as hard and soft carbon steels. The ultra-thin straight wheel design provides minimal material loss, saving you money and protecting your project. Full fiberglass reinforcement stabilizes the cuts and the economical price point balances value and performance.
Weiler 36542 Cut-Off Wheel Mandrel WHEEL CUTOFF MTL 3X1/16X1/4IN WHEEL CUTOFF MTL 3X1/16X3/8IN
Cutoff/grinding wheel mandrel for small diameter wheels with 3/8 in arbor holes, adapts to 1/4 in stem for use on high-speed air or electric grinders. Carded. Aluminum oxide metal cut-off wheels. Designed for metal cutting, metal abrasion, body work, metal fabrication and general repair work. Used on ferrous materials. Designed to be used on die and air grinders only. Aluminum oxide metal cut-off wheels. Designed for metal cutting, metal abrasion, body work, metal fabrication and general repair work. Used on ferrous materials. Designed to be used on die and air grinders only.
WHEEL CUTOFF MTL 3X1/8X1/4INCH WHEEL CUTOFF MTL 3X1/8X3/8IN  DISC CUT-OFF THN KERF MTL 3IN
Aluminum oxide metal cut-off wheels. Designed for metal cutting, metal abrasion, body work, metal fabrication and general repair work. Used on ferrous materials. Designed to be used on die and air grinders only. Aluminum oxide metal cut-off wheels. Designed for metal cutting, metal abrasion, body work, metal fabrication and general repair work. Used on ferrous materials. Designed to be used on die and air grinders only. Diablo's premium metal cut-off discs provide superior performance and increased productivity. Featuring a premium aluminum oxide blend, these discs cut through material faster than other cut-off discs and offer an extra long cutting life. Diablo's thin kerf design provides for a thin, fast cut with minimal burr formation. Unlike other bonded discs on the market, this cut-off disc is a true 0.4 in design. Fully reinforced for use in hand-held cut-off work. Ideal for use when working in hard to reach areas.
MANDREL AP FOR 3 DISC CUTOFF  BLADE CUT-OFF 3INX3/32INX3/8IN BLADE CUT-OFF 3INX1/16INX3/8IN
Designed for use with 2 in and 3 in bonded discs. The hex shank mandrel fits standard drills. Idea for use on metal materials. Dimension of 3/4 in W x 2-1/4 in L. Arbor size of 3/4 in W. GatorBlade Cut-Off Wheel, Fiberglass Backing, 3/8 in Arbor, 20,300 rpm Speed, 3 in Diameter, 3/32 in Thickness, Applicable Materials: Metal, Suitable for: Die Grinder
MANDREL KIT TYP1 1/4-3/8ARBORS CUTOFF WHEEL 5PC STEEL 3IN    CUTOFF WHEEL DIAM DG 2 X 3/8IN
Mandrel kit for type 1 cut-off wheels. Included in Forney Industries item# 71798, 3 in cut-off wheel kit. 3 in cut-off wheel kit with 1/4 in shaft mandrel. Includes 1 each of Forney 71840, 71841 and 71855, type 1 steel cut-off wheels, plus Forney 72386 mandrel set. Lenox MetalMax? is designed for use in the same power tools as bonded abrasive wheels, at the same rpm and feed forces. No changes in operating settings are required. Use Lenox MetalMax? as you would a bonded abrasive wheel.
CUTOFF WHEEL DIAM DG 3 X 3/8IN CUTOFF WHEEL DIAM DG 1.5X3/8IN
Lenox MetalMax? is designed for use in the same power tools as bonded abrasive wheels, at the same rpm and feed forces. No changes in operating settings are required. Use Lenox MetalMax? as you would a bonded abrasive wheel. Lenox MetalMax? is designed for use in the same power tools as bonded abrasive wheels, at the same rpm and feed forces. No changes in operating settings are required. Use Lenox MetalMax? as you would a bonded abrasive wheel.
   
 
1