Home > PAINT & SUNDRIES > SUNDRIES > LADDERS > PLATFORM & SCAFFOLDING
Sort By:
1 2
LOCK PIG TAIL                 SPRING CLIP GREY 3IN          PIN COUPLING W/COLLAR 1IN
For exterior scaffolding. Meets ANSI, CSA and OSHA standards. 1-1/2 in x 3 in. Made of corrosion-resistant stainless steel. Can be used for both standard mason and walk-through (arch) scaffold frames. Used to hold METALTECH coupling pin on scaffolding frame. Meets ANSI, CSA and OSHA standards. For a hole 1/2 in. Replacement coupling pin with 1 in. collar includes locking spring. Rugged steel construction ensures lasting durability. Use with standard or arched scaffold frames. Serves as connector when stacking mason and arch scaffold frames. Tapered end allows for easy stacking. Weather resistant for lasting use. This pin is acceptable for both 1.69 in. and 1-5/8 in. tube OD frames. Meets OSHA standards for safety.
LOCK ARM SCAFFOLD 13IN        Qualcraft 2504 Roofing Brackets Qualcraft 2501 Roofing Brackets
Use to lock when stacking frames. Use with standard or arched scaffold frames. Distance between the bolt holes are 13 in. Blue powder-coat for corrosion protection. Meets ANSI, CSA and OSHA standards. Weather resistant. Providing a complete range of roof brackets, Qualcraft offers fixed and adjustable roof brackets for all roof pitches and materials including slate. Durable, easy-to-install and remove and designed to protect all roof surfaces, Qualcraft is the only name you'll need to remember for professional roofing tools. Capacity is one worker plus 40 lb/8 ft staging. Maximum of 8 ft of spacing between brackets. Providing a complete range of roof brackets, Qualcraft offers fixed and adjustable roof brackets for all roof pitches and materials including slate. Durable, easy-to-install and remove and designed to protect all roof surfaces, Qualcraft is the only name you'll need to remember for professional roofing tools. Capacity is one worker plus 40 lb/8 ft staging. Maximum of 8 ft of spacing between brackets.
Qualcraft 2502 Roofing Brackets Qualcraft 2503 Roofing Brackets Qualcraft 2500 Roofing Brackets
Providing a complete range of roof brackets, Qualcraft offers fixed and adjustable roof brackets for all roof pitches and materials including slate. Durable, easy-to-install and remove and designed to protect all roof surfaces, Qualcraft is the only name you'll need to remember for professional roofing tools. Capacity is one worker plus 40 lb/8 ft staging. Maximum of 8 ft of spacing between brackets. Providing a complete range of roof brackets, Qualcraft offers fixed and adjustable roof brackets for all roof pitches and materials including slate. Durable, easy-to-install and remove and designed to protect all roof surfaces, Qualcraft is the only name you'll need to remember for professional roofing tools. Capacity is one worker plus 40 lb/8 ft staging. Maximum of 8 ft of spacing between brackets. The adjustable roofing bracket attaches to the our pump jack system to offer a sturdy, flat surface to stand on while roofing or working at heights. The bracket features a durable all-steel construction with an adjustable 6 in or 10 in platform. This product is designed to be used with 2 in x 6 in or 10 in planks, the bracket allows for easy installation and removal without damaging shingles. Already compliant with OSHA regulations, it is recommended to use at least on bracket per every 8 ft of spacing.
GUARDRAIL 5FT                 GUARDRAIL 7FT                 Prosource YH-CS001 Casters
Meets ANSI, CSA and OSHA standards. Meets ANSI, CSA and OSHA standards. The casters can swivel and rotate 360 degrees, which makes moving and turning the scaffold easy. Smooth and quiet operation. Perfect for industrial applications, such as warehousing, delivery, medical devices, factories, and so on.
TRAY BAKER TOOL               GUARDRAIL POST W/WEDGE CLAMP  BRACE SCAFFOLD CROSS 7X4FTX1IN
For use with I-CISC, I-CISCTP, I-CISCPY, I-CAISC and I-IRC scaffolds. Black polypropylene. 30-1/4 x 20 x 2-3/4 in. Meets ANSI, CSA and OSHA standards. Designed for scaffold frames that have 4 ft. locking pin spacing. Cross brace must be installed on each leg of a frame or arch frame to reach its full load capacity. Works with both standard and arched scaffold frames for versatile use. Durable construction with 1 in OD galvanized steel tube, 16 ga Weather Resistant. ANSI Specified. CSA Certified. OSHA Approved.
JACK ADJ LEVELLING GALV 24IN  BRACE CROSS GALV 7FT X 2FT    BRACKET SIDE 20IN
With hollow plate. Meets ANSI, CSA and OSHA. METALTECH Cross Brace, Steel, Galvanized, Dimensions: 2 x 7 ft Meets ANSI, CSA and OSHA standards.
QualCraft 2420 2-Rung Short Body Ladder Jack BRACKET SIDE 30IN             Qualcraft 2200 Pump Jacks
The guardian fall protection 2-rung ladder jack is MIG welded and possesses a riveted construction for excellent strength and durability. It is setup over 2 consecutive ladder rungs, can be used on either side of a ladder and is ideal for painting, siding and repair applications. This jack is easy to both install and remove and will even accommodate planking up to 18 in wide when used in combination with a paired Ladder Jack and installed and used in accordance with all applicable OSHA regulations. Meets ANSI, CSA and OSHA standards. Steel construction. Adjustable to any height up to 30 ft. Your weight does the work. Raise or lower men and equipment. Held secure to wood poles with a positive double lock system. Raise to position with foot pump and lower with crank. Must be used in strict compliance with Federal OSHA regulations. New York State Approval No. 4781.
Prosource YH-TR001-2 Outrigger FRAME SCAFFOLD 60X60IN        OUTRIGGER EXT 32IN
This multi-use scaffolding unit can provide additional stability and extend the width of the scaffold base, giving you options to enhance your safety. Powder coated. Flip locking system. Includes coupling pins and spring-locks. Gravity-lock frame lock. 48in lock spacing. Interior tubes: outside diameter 1 in. 16 ga Perimeter tubes: outside diameter 1-5/8 in. 13 ga Meets ANSI and OSHA Standards. Use to provide additional stability for higher elevations. High performance steel and heavy duty welds for a solid and secure footing. Use with any standard or arched scaffold frames. Blue anti-slip baked on powder-coated textured finish for maximum corrosion resistance. Meets OSHA requirements.
PLATFRM WK PRTBL 1.67X3.75X1FT Vulcan YH-SD401/YTL40102 Scaffold OUTRIGGERS SET W/CSTR 4-5IN
The AP-25 Pro work platform has a large work surface, EASY-GRAB handles (Patent Pending) and slim-fold dual locking legs to work quickly and safely from side to side. The new EASY-GRAB Handles allow you to transport the work platform in one hand while holding supplies in the other. The slim fold dual locking legs securely lock when the legs are open for safety and lock again when closed for easy transport and storage. The higher 300lb load capacity means you can carry more with you to get the job done. This mini scaffold are built to help make your work easier and safer. Safety is key when working in heights. Quality control, testing procedures, precision of the welding process, correct installation are key when assembling a scaffold structure to minimize liability and worker risk of injury. Assembled dimension of 19-1/4 in x 4-1/2 in x 24 in, weighs 33 lb. 5 in double locking heavy-duty casters. Includes four outriggers, four casters and 12 locking pins. Compatible with I-CISC, I-CISCTP and I-CAISC. Meets ANSI, CSA and OSHA standards.
Werner AC10 2-Rung Long Body Ladder Jack Prosource YH-GR001B Guard Rail Werner PS-48 Portable Rolling Scaffold
The AC10-20-02 two rung long body ladder jack is designed for quick field adjustments. The platform clamp system clamp secures the platform to the ladder jacks and ties supporting ladders together to help secure an entire ladder jack system. The lightweight but sturdy jack mounts on either side of the extension ladder. It accepts stages up to 20 in width. Recommended for use with 300 lb Type IA and 375 lb Type IAA extension ladders. This guard rail assembly is made out of steel is designed to fit on top of our bakers scaffold platform. It has gates on each end for easy access and uses pins to lock onto the scaffold frames. The PS-48 Portable Scaffold is a versatile, portable 4 ft scaffold that can be used as a push cart, working scaffold, storage shelf or work bench. Contains two planks with combined 500 lb load capacity. Planks adjust to different working heights of 12 in, 24 in or 36 in. Non-marring wheels prevent damage to floor by securely locking into place. Multi-use S-hooks make transportation easy and are ToolLasso? ready.
   
 
1 2