|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zinc die-cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL listed.
|
Die cast of high strength corrosion-resistant zinc alloy. Locknut is reversible. It is designed to cut through protective coatings on boxes and enclosures to assure ground continuity. Use as a raceway between two steel outlet boxes or other metal enclosures. UL and CSA listed.
|
Zinc die-cast. Use as a raceway between two steel outlet boxes or other metal enclosures. UL listed. Bulk packed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zinc die-cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL listed.
|
Zinc die-cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL listed.
|
Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zinc die-cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved.
|
Zinc die-cast. Use as a raceway between two steel outlet boxes or other metal enclosures. UL listed. Bulk packed.
|
Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Halex Conduit Chase Nipple, 1/2 in Trade, Threaded Connection, Zinc, 0.68 in Length, 1.02 in OD
|
Zinc die-cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4 in. UL listed.
|
Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of steel, fully threaded. Indoor or outdoor. Use to connect two steel outlet boxes or other metal enclosures or to extend a length of threaded Rigid or IMC conduit. Bulk packed.
|
Zinc die-cast. Indoors or outdoors. Use as a wire pulling elbow to facilitate wire pulling through a sharp bend in a run of threaded Rigid or IMC conduit. Removable cover provides easy access to wiring. UL listed. Bulk packed.
|
Zinc die-cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL listed.
|
Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved.
|
Zinc die-cast. Indoors or outdoors. Use as a wire pulling elbow to facilitate wire pulling through a sharp bend in a run of threaded Rigid or IMC conduit. Removable cover provides easy access to wiring. UL listed. Bulk packed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Aluminum, indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC) and maintenance. With cover and gasket. UL Approved. Tray boxed.
|
Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC) and maintenance. With cover and gasket. UL Approved.
|
Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC) and maintenance. With cover and gasket. UL approved. Tray boxed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL listed.
|
Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved.
|
Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC) and maintenance. With cover and gasket. UL Approved. Tray boxed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Copper-free die-cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL listed. Tray boxed.
|
Zinc die-cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4 in. UL approved.
|
Die-cast of high strength corrosion-resistant zinc alloy. Locknut is reversible. It is designed to cut through protective coatings on boxes and enclosures to assure ground continuity. Use as a raceway between two steel outlet boxes or other metal enclosures. UL and CSA Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC) and maintenance. UL approved. Tray boxed.
|
Use to allow a 90 deg change of direction in a run of rigid or IMC conduit. UL listed.
|
Southwire? the name you trust, now offers a new innovative way to install conduit fittings. Never thread conduit again with Southwire's? Rigid SIMPush? fittings. SIMPush? fittings simply slide onto the conduit and lock in place eliminating the extra work. All SIMPush? fittings come in a variety of styles and sizes and are easily removable and reusable. you simply slide the removal tool onto the collar of the fitting and pull. You won't need any other fitting after using Southwire's? SIMPush? push to install Rigid conduit fittings.
|
|
|
