|
|
|
|
|
|
|
|
|
|
|
|
|
|
Convert existing 1/2 in underground sprinkler systems to low flow watering where a drip circuit can't be set up. Adjustable bubblers are available in stream spray with a maximum spray diameter of 3 ft at 30 psi or for finer water droplets, a fan spray, with spray diameter up to 13 ft at 30 psi. Bubbler flow rates are adjustable from 0 to 13 gph at 30 psi for stream type and from 0 to 24 gph at 30 psi for the fan spray. These features allow the higher flow rates required when watering large and small plants on the same circuit.
|
For use with 5/8 in (0.690 to 0.700 in OD) hose only. Compression inlet/outlet shut-off for 5/8 in hose. For water pressure up to 60 psi.
|
Connects Raindrip low-flow sprinklers to 1/2 in MPT sprinkler risers. 1/2 in FPT inlet. 10-32 FNFT outlet. Includes filter washer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Unique design accommodates a range of hose diameters and will not blow off hose with water pressures up to 100 psi. For use with 1/2 to 0.710 in (0.520 to 0.620 in ID) hose.
|
Used to shut-off the end of 1/4 in tubing. Removes easily.
|
Black poly clamps molded to fit 1/4 in tubing. Includes pre-inserted nail.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connects 1/4 in tubing to existing 1/2 in MPT underground sprinkler riser. 1/2 in FPT Inlet. 1/4 in compression and 1/2 in MPT outlet. Includes filter washer.
|
Double-ended, double-duty plugs seal either large or small holes in 1/2 in, 5/8 in or 0.71 in hose.
|
3/4 in pipe thread swivel x 1/2 in compression adaptor connects 1/2 in poly hose to 3/4 in male pipe thread. Washer included. For use with 1/2 in (0.62 to 0.63 in OD) hose only. Green compression ring.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with 1/4 in (0.16 in I.D.) tube only. Connects 1/4 in tubing to faucet or other 3/4 in male hose thread. Includes filter washer.
|
3/4 in hose thread swivel x 1/2 in compression adaptor connects 1/2 in poly hose to faucet or other 3/4 in male hose thread. Includes filter washer. For use with 1/2 in (0.62 in to 0.630 in OD) hose only. Green compression ring.
|
4 in plastic stakes hold 1/4 in tubing in place next to plants.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty plastic stakes hold 1/4 in lines in place.
|
Double barbed design, allows use with higher pressures, join or connect two lengths of line. 1/4 in connector used with 1/4 in (0.160 to 0.197 in ID) tube only. Double barb design allows water pressures up to 50 psi.
|
Double barbed design allows use with higher water pressures. For use with 1/4 in (0.160 to 0.197 in ID) tube only. Creates a 1/4 in branch from a 1/4 in tube or two 1/4 in branches from a 1/2 in hose. For water pressures up to 50 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Double barbed design allows water pressure up to 50 psi.
|
Closes ends of 1/2 in (0.620 to 0.630 in OD) poly hose when frequent flushing is necessary. Green compression ring. Made from ABS. For water pressure up to 60 psi.
|
Used to shut-off the end of 1/2 in rain drip poly hose. Removes easily.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Join or connect two lengths hose. Made from ABS. For water pressure up to 60 psi.
|
Designed for comfortable use, punches holes in 1/2 in, 5/8 in or 0.710 in hose to insert PC drippers or 1/4 in fittings. Handle has socket for installing and removing Micro spray jets. Card includes hole plugs.
|
For water pressure up to 60 psi. Ends are color-coded for easy size identification.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty 13 in stake with adjustable 8 in rigid riser for use with low-flow sprinklers and spray heads with 10-32 NFT inlets. Just screw the sprinkler/sprayer into the rigid riser moving it up or down to water above plants. Constructed of high-density polyethylene and polypropylene.
|
Compression tees made from ABS. For water pressure up to 60 psi.
|
Swivel tee assembly for 1/2 in double drip manifold. Connects two 1/2 in poly hose to a 1/2 in sprinkler riser. Includes tee, filter, 3-way connector and 2 flow controls.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adjust, balances or shuts off water flow to watering circuits, zones or plants. For use with 1/4 in (0.160 in ID) vinyl tubing only. Double barbed design allows water pressure up to 50 psi.
|
Convert existing 1/2 in underground sprinkler systems to low flow watering where a drip circuit can't be set up. Available in stream spray with a maximum spray diameter of 3 ft at 30 psi or for finer water droplets, a fan spray, with spray diameter up to 13 ft at 30 psi. Adjustable bubbler rotates easily to preferred water flow, from full coverage for shrubs and large potted trees to shut-off position.
|
Convert existing 1/2 in underground sprinkler systems to low flow watering where a drip circuit can't be set up. Adjustable bubblers are available in stream spray with a maximum spray diameter of 3 ft at 30 psi or for finer water droplets, a fan spray with spray diameter up to 13 ft at 30 psi. Bubbler flow rates are adjustable from 0 - 13 gph at 30 psi for stream type and from 0 - 24 gph at 30 psi for the fan spray. These features allow the higher flow rates required when watering large and small plants on the same circuit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Raindrip Stream Spray Bubbler, Adjustable, Specifications: 1/4 in Barb Connection, 3 ft Dia Coverage, 0 to 13 gph Flow Rate, 30 psi Operating Pressure
|
Uniformly sprays water over a semicircular area with an adjustable radius of up to 7 ft. Sprayer inlet size of 10-32 NFT. Featuring a knob to adjust the flow (4 to 20 gph at 25 psi) and diameter of spray.
|
3/4 in hose female thread inlet; 3/4 in male hose thread outlet. Includes filter washer. Available in 3/4 in BSP threads. Atmospheric vacuum breaker made of high impact ABS. Keeps impure water from syphoning back into water supply. Maximum flow rate of 480 GPH.
|
|
|
