Home > ELECTRICAL > ROUGH ELECTRICAL > SURFACE WIRING
Choose a sub category:
WALL CHANNEL- WIREMOLD
Sort By:
1 2
CordMate II Legrand C Wireway Inside Elbow CordMate II Legrand C Wireway Outside Elbow CordMate Legrand C19 Channel Coupling
For making a 90 degree turn around an inside corner from wall-to-wall or wall-to-ceiling. For making a 90 degree turn around an outside corner. Joins channels that hide and organize loose cords and wires. UL Listed.
CordMate Legrand C Wireway Outside Elbow CordMate Legrand C Wireway Inside Elbow CordMate Legrand C Wireway Flat Elbow
Hides and organizes loose cords and wires. Hides and organizes loose cords and wires. Hides and organizes loose cords and wire.
CordMate II Legrand C Wireway Flat Elbow CordMate II Legrand C59 Joint Cover Channel Coupling CordMate II Legrand C 3-Way Standard T-Fitting
Hides and organizes loose cords and wire. Joins channels that hide and organize loose cords and wires. UL Listed. For installation requiring 3-way branching including 90-degree angle.
Legrand NM7 Nonmetallic Raceway Inside Elbow Legrand NM8 Nonmetallic Raceway Outside Elbow Wiremold NM910 Connection Cover
For making a 90 degree inside turn around a corner from wall-to-wall or wall-to-ceiling. For making a 90 degree outside turn around a corner. Mounting components for NMI wire channel, including screws and anchors, wire clips and joint cover.
CordMate Legrand NM Raceway Wireway Inside Elbow Legrand NMW910 Raceway Accessory Pack CordMate Legrand NM Raceway Wireway Outside Elbow
For making a 90 degree inside turn around a corner from wall-to-wall or wall-to-ceiling. Mounting components for NMI wire channel, including screws and anchors, wire clips and joint cover. For making a 90 degree outside turn around a corner.
Legrand NM11 T-Fitting CordMate Legrand NMW11 3-Way T-Fitting Legrand NM6 Nonmetallic Raceway Flat Elbow
For branching wire channel in two directions at 90 degree angles. For branching wire channel in two directions at 90 degree angles. For making 90 degree right or left turns on a flat surface.
Legrand B-6 Metal Raceway Flat Elbow Legrand B-7 Metal Raceway Inside Elbow Legrand B-8 Metal Raceway Outside Elbow
Used to make a 90 degree right or left turn on a flat surface. Used to make a 90 degree inside turn around a corner, from wall-to-wall or wall-to-ceiling. Used to make a 90 degree outside turn around a corner.
CordMate Legrand NM Raceway Wireway Flat Elbow CordMate Legrand C10 Wire Channel Legrand NMW17 Raceway Conduit Connector
For making 90 degree right or left turns on a flat surface. Hides and organizes low voltage loose cords and wires. UL Listed. 1/2" height x 3/8" width x 5' length. For transitioning from nonmetallic raceway to conduit. Hides and organizes loose cords and wires.
Wiremold B81 Metal Raceway Box Connector Wiremold Raceway On-Wall Mount Conduit Connector Wiremold B-17 Raceway Combination Connector
For connecting raceway to conduit boxes with 1/2" knockout. For transitioning from nonmetallic raceway to conduit. Hides and organizes loose cords and wires. Metal raceway. For transitioning from metal raceway to 1/2" conduit or from any steel box with 1/2" knockout.
Legrand CordMate II C53 Datacom Box Legrand NM Outlet Box Legrand NM Deep Outlet Box
For mounting phone, fax, cable and audio connections (not for power). Paintable with a latex base paint. Simple to use, just peel off self-adhesive backing. Fits over existing single gang outlet to feed power as the starting point for your system. 1" deep. For installing dimmer switches as well as standard size switches and outlets. 1-7/16" length x 1-3/8" depth.
   
 
1 2