|
|
|
|
|
|
|
|
|
|
|
|
|
|
Behrens Screw Hook, Behrens, Suitable For Use With: 1-5/8 in Gates, 5/8 X 6 in, Zinc Plated
|
Wire this unit push-button directly to your gate opener for simple open/close/stop operation from up to 1000 ft (304.8 m) away. Uses 16 ga, multi-stranded, dual conductor. Low-voltage wire (RB509).
|
The Ghost Controls push-button is a simple switch to operate the gate. This non-illuminated button easily connects with two wires to the main system controller to allow you to open, stop or close the gate opener. Requires low voltage wire to be purchased separately for installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Behrens Gate Hinge, Adjustable, Tubular, Steel, Behrens, Suitable For Use With: 1-5/8 in Tube Gates, Fasteners: 5/8 in Screw and Bolt, Hot Dip Galvanized, Includes: Hardware
|
This locking solid-steel clevis pin is designed to replace the standard clevis pin included in all ghost controls automatic gate opener kits. This locking pin allows any padlock with a shank up to 8 mm in diameter to be used to secure your automatic gate opener to the rear post mount. This is the same pin that is included in the ax2l and ax3l security kits.
|
Speeco Gate Hinge, Speeco, Suitable For Use With: 1-5/8 in to 1-3/4 in OD Round Tube Gates, Fasteners: 5/8 X 6 in Bolt, Includes: Upper and Lower Hinges and Mounting Hardware
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
New Farm Gate Latch, Quick Latch, Stainless Steel Spring, New Farm, Suitable For Use With: 1/4 in Coil Chain
|
Behrens Gate Hinge, Heavy Duty, Plated, Behrens, Suitable For Use With: 3/4 X 12 in Bolt Hook, 2 in Overall Width, Hot Dip Galvanized
|
Behrens Bolt Hook, Behrens, Suitable For Use With: 1-5/8 in Gates, 5/8 X 12 in, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Speeco Gate Latch, 1-Way, Lockable, Speeco, Suitable For Use With: 1-5/8 - 2 in OD Round Tube Gates, Red
|
Speeco Gate Hinge, Speeco, Suitable For Use With: 2 in Round Tube Gates, Fasteners: 3/4 X 12 in Bolt, Includes: Upper and Lower Hinges and Mounting Hardware
|
Behrens Bolt Hook, Behrens, Suitable For Use With: 2 in Gates, 3/4 X 12 in, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Speeco Gate Latch, 2-Way, Lockable, Speeco, Suitable For Use With: 1-1/4 - 1-1/2 in OD Round Tube Gates, Black
|
Speeco Gate Anchor, Speeco, Suitable For Use With: 1-3/4 - 2 in OD Round Tube Gates, Painted, Red
|
Speeco Gate Latch, 2-Way, Lockable, Speeco, Suitable For Use With: 1-5/8 - 2 in OD Round Tube Gates, Blue
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Speeco Gate Latch, 2-Way, Lockable, Speeco, Suitable For Use With: 1-5/8 - 2 in OD Round Tube Gates, Blue
|
Speeco Gate Wheel, Speeco, Suitable For Use With: 1-5/8 - 2 in OD Round Tube Gates, 8 in Diameter, Painted, Blue
|
The push-to-open adapter bracket kit includes two pivot brackets for the rear mount to use when installing a Ghost Controls gate opener system on a push-to-open application. Push-to-open applications are less commonly installed and require this additional hardware for proper clearance of the operator.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Speeco Gate Closer, Heavy Duty, Speeco, 5 in Diameter, Powder Coated
|
The security pin lock helps provide security and peace of mind by preventing a gate opener arm from being removed or stolen and allowing unwanted access to the property. The pin lock substitutes for the clevis pin at the front end mount of all models of MIGHTY MULE swing gate openers and it does not allow the clevis pin to be removed from the gate without a key to the lock.
|
The push-to-open bracket is an 11 in metal bracket that connects the gate opener to the gate post at an angle that allows the gate to swing away from the property, instead of into it. The FM148 is compatible with the Mighty Mule FM500/502, 600 & 350/352 automatic gate openers. This feature is useful on sloping driveways or where space prevents a gate from opening inward. Two-brackets are needed for dual gate installations.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MIGHTY MULE Door Opener, ABS, Includes: Battery
|
Speeco Gate Closer, Adjustable, Cable, Heavy Duty, Steel, Speeco, Powder Coated, For Designed to Accept a Padlock
|
This 12 V, 7.0 Ah, maintenance-free battery is the replacement or 2nd back-up battery for the FM500/FM502 MIGHTY MULE gate openers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The GHOST CONTROLS 12 V 7 A hour battery is designed for use in GHOST CONTROLS and other gate opener systems that utilize an internal battery design within the battery.
|
The Ghost Controls universal tube bracket kit is an ideal solution for easily mounting your gate opener front mount, AXZL ZombieLock or a variety of other things to a tubular or chain link gate or fence.
|
The GHOST CONTROLS three button water-resistant remote control can be used to operate any (single or dual) GHOST CONTROLS automatic gate opener system. This remote is water-resistant for use in outdoor environments. A long-life lithium battery is included for your convenience.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Ghost Controls three-button standard remote control can be used to operate up to two different gates (single or dual) with the same unit. A long-life lithium battery is included for your convenience.
|
The Ghost Controls 5-Button Premium Remote Control can be used to operate up to 2 different gate opener systems (single and or dual) with the same unit and is programmed to enable/disable PartyMode, System Battery Level and VacationMode. A long-life lithium battery is included for your convenience.
|
This 16 ga, multi-stranded, dual conductor low voltage wire can be used for installing an AC transformer, solar panel, wireless intercom/keypad or most other automatic gate opener accessories. This wire is UV treated and PVC coated and is rated for direct burial. However, GTO recommends running the wire through conduit or PVC pipe in order to protect it from the elements and ensure longer life for your wire.
|
|
|
