|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Danco sillcock key is used to open and close sillcocks or spigots. This key will fit 5/16 in valves. It is constructed of metal to provide strength and durability.
|
Replacement wheels for PP840-35 tube cutter. High carbon steel. Pack of 2. Carded.
|
This key will fit valves and it's for use on outside water faucets. It's made of constructed metal which provides strength and durability. The silcock key is for a 1/4 in stem.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for cleaning, deburring and polishing the inside of copper fittings prior to soldering. Can also be used to clean plastic and brass. Brush is made of high carbon steel bristles to ensure a long lasting, durable and sharp cutting surface. Contoured plastic handle provides a comfortable grip. Stem is made of galvanized steel wire.
|
E-Z clean abrasive sandcloth is a flexible yet strong cotton fabric combined with a tough, hard 120-grit aluminum oxide abrasive to provide faster cleaning. Two layers of a special adhesive and water-resistant resin make a plumber's roll that provides consistently stronger solder joints.
|
The ProSource copper fitting brushes are ideal for cleaning the inside of tubing and fittings. They are polybagged. The trim length is 1/2 in L.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OD tube cleaning brush is used for cleaning the outside diameter of copper piping prior to soldering. Can also be used to clean plastic pipe. Cleans outside piping quickly and effectively. Outer cover is made of high-impact polystyrene. Brush is made of hard bright tempered steel wire. Easy-to-grip brush ensures a clean surface and prepares the pipe for soldering or solvent welding.
|
The ProSource copper fitting brushes are ideal for cleaning the inside of tubing and fittings. They are polybagged. The trim length is 3/4 in L.
|
Designed for cleaning, deburring and polishing the inside of copper fittings prior to soldering. Can also be used to clean plastic and brass. Brush is made of high carbon steel bristles to ensure a long lasting, durable and sharp cutting surface. Contoured plastic handle provides a comfortable grip. Stem is made of galvanized steel wire.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for cleaning, deburring and polishing the inside of copper fittings prior to soldering. Can also be used to clean plastic and brass. Brush is made of high carbon steel bristles to ensure a long lasting, durable and sharp cutting surface. Contoured plastic handle provides a comfortable grip. Stem is made of galvanized steel wire.
|
One stainless steel bristled brush for cleaning threads on hard metal pipes and one with brass bristles for use on softer metals. Cleans threaded pipe and fittings and much more.
|
OD tube cleaning brush is used for cleaning the outside diameter of copper piping prior to soldering. Can also be used to clean plastic pipe. Cleans outside piping quickly and effectively. Outer cover is made of high-impact polystyrene. Brush is made of hard bright tempered steel wire. Easy-to-grip brush ensures a clean surface and prepares the pipe for soldering or solvent welding.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OD tube cleaning brush is used for cleaning the outside diameter of copper piping prior to soldering. Can also be used to clean plastic pipe. Cleans outside piping quickly and effectively. Outer cover is made of high-impact polystyrene. Brush is made of hard bright tempered steel wire. Easy-to-grip brush ensures a clean surface and prepares the pipe for soldering or solvent welding.
|
Tube cleaning brush for cleaning outer walls of copper pipe.
|
Will not tear or rust. For cleaning pipe and fittings and general use. Contains two 2 x 6 in coarse-grade nylon pads.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey? Plumber's abrasive sandcloth blends a lightweight but strong cotton-based fabric with a tough aluminum abrasive for cleaning copper pipe, fittings and other soft metals.
|
For smoothing pipes to create secure connections.
|
Tube cleaning brush for cleaning outer walls of copper pipe.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Soft bristles for applying primer, glue, or other solutions. 2 per card.
|
Cleans and prepares surfaces for joining. Set includes one brass bristled brush and one stainless steel bristled brush. Use to clean and prepare pipe surfaces prior to join. Removes debris, rust and dirt.
|
Tube cleaning brush for cleaning outer walls of copper pipe.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Loose key handle. Fits all models.
|
The ProSource tube cutter wheel is the replacement cutter for Sku #682-1771 and #680-1716.
|
For use with all General cutters for cutting copper tubing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 per card.
|
1 per card.
|
PVC Pipe cutter replacement blade. Ratcheting tooth design. 1 blade/Pack.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource shower valve socket wrench set has a nickel-plated steel body. It fits 29/32 in and 31/32 in packing nuts.
|
The faucet reseating tool can be used to resurface compression-type faucet seats. Tool features hardened steel cutters and centering cone to help ensure level resurfacing.
|
"No. 42835: For use with all Superior 1-1/8"" capacity tube cutters."
|
|
|
