|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lambro Vent Hose, 4 in ID, 8 ft L, Vinyl, White, Includes: (1) Vinyl Duct
|
Includes hose and two plastic clamps. Not recommended for venting or high temperature venting. Polybagged.
|
Lambro Vent Hose, 4 in ID, 20 ft L, Vinyl, White, Includes: (1) Vinyl Duct
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal for bathroom fan venting and other general purpose exhaust applications. Made from 3 ply aluminum foil laminate with a maximum operating temperature of 250??F. UL versions of this item are available if required by code. UL ducts are UL181 listed and marked.
|
The Lambro white plastic louvered bath fan exhaust vent kit featuring 4 in x 8 ft UL 181 air connector is ideal for venting through the wall. This kit is used for bath fan exhaust and other general venting applications that require moist air and humidity from exiting the home. The multi-flaps allows for maximum airflow while reducing back flow of exhaust air. The vent can be painted to match your home's trim color.
|
Includes flexible vinyl hose, 4 in ring plate, 2 plastic clamps and 4 in preferred hood.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UL 181, Class 1 air connector label for general venting. Multiply design of metalized polyester with 1 in pitch steel wire support.
|
Includes flexible vinyl hose, 4 in ring plate, 2 plastic clamps and 4 in preferred hood.
|
Vinyl duct vent kits with louver vent hood, to be used for bathroom fans. Includes flexible vinyl duct, ring plate and 2 plastic clamps.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dundas Jafine ProVent? exhaust hoods feature a three louver damper system that helps to prevent cold air backdraft, snow or rain from entering the home. The louvers are cammed to allow for easy pivoting and to help prevent sticking. Additional features include a recessed caulk line to assist in a clean caulking application and a snap on pipe to cap assembly that eliminates the need for lint trapping staples. All ProVent? products have a UV resistant coating to prevent the cap from discoloring and are paintable to match the exterior of your home. These hoods can be used in conjunction with brick, concrete or siding. ProVent? exhaust hoods can be purchased as a stand alone hood or in conjunction with our Dundas Jafine J-channels and are ideal for bathroom fan venting, dryer venting and kitchen range hood venting.
|
White polymeric grill. One-piece polymeric wheel. Plastic collar for 3 in duct connection, comes complete with built-in non-metallic back draft damper for quiet operation. Rated for ceilings insulated to R-40. UL listed for installation over a tub or shower on a GFCI circuit. HVI2100 certified. Grill dimension of 10 x 9-1/2 in. Housing dimension of 7-1/4 x 7-1/4 x 3-3/4 in.
|
Dundas Jafine's ProVent? bathroom fan vent kit is ideal for bathroom fan venting applications that require a wall style installation. The kit includes a 4 in ProVent? exhaust hood, a 4 in x 5 ft vinyl duct, a 3 to 4 in foam adapter and two plastic adjustable clamps. The ProVent? exhaust hood features three louver damper system that helps to prevent cold air backdraft, snow or rain from entering the home. The louvers are cammed to allow for easy pivoting and to help prevent sticking. Additional features include a recessed caulk line to assist in a clean caulking application and a snap-on pipe to cap assembly that eliminates the need for lint trapping staples all ProVent? products have a UV-resistant coating to prevent the cap from discoloring and are paintable to match the exterior of your home. These hoods can be used in conjunction with brick, concrete or siding.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For bathroom or utility room ventilation. Includes black plastic roof cap with 1-3/4 in flange, 4 in x 8 ft flexible vinyl hose, 3 in adapter and 2 clamps.
|
Lambro Vent Hose, 3 in ID, 50 ft L, Vinyl, White, Includes: (1) Vinyl Duct
|
Kit contains 4 in black plastic roof cap, plastic adaptor, 2 plastic clamps and 4 in x 8 ft UL listed duct. Recommended use bathroom fan.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lambro Vent Hose, 4 in ID, 50 ft L, Vinyl, White, Includes: (1) Vinyl Duct
|
The high-performance exhaust fan Series feature a unique snap-in-installation system. Installs in ceiling. The durable high-impact plastic housing ensures quiet operation and maximum performance. Motors are suitable for continuous operation. Includes wire nuts and connector. 4 in plastic duct collar with back draft damper insures quiet operation and prevents drafts from entering the room. White, polymeric grill. Dimensions of 10 in x 10 in. One-piece polymeric wheel. Rated for ceilings insulated to R-40. cULus listed. HVI2100 certified.
|
White polymeric grill. One-piece polymeric wheel. Plastic collar for 3 in duct connection, comes complete with built-in non-metallic back draft damper for quiet operation. Rated for ceilings insulated to R-40. UL listed for installation over a tub or shower on a GFCI circuit. HVI2100 certified. Grill dimension of 10 x 9-1/2 in. Housing dimension of 7-1/4 x 7-1/4 x 3-3/4 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The high-performance exhaust fan Series feature a unique snap-in-installation system. Installs in ceiling. The durable high-impact plastic housing ensures quiet operation and maximum performance. Motors are suitable for continuous operation. Includes wire nuts and connector. 4 in plastic duct collar with back draft damper insures quiet operation and prevents drafts from entering the room. White, polymeric grill. Dimensions of 10 in x 10 in. One-piece polymeric wheel. Rated for ceilings insulated to R-40. cULus listed. HVI2100 certified.
|
The high-performance exhaust fan Series feature a unique snap-in-installation system. Installs in ceiling. The durable high-impact plastic housing ensures quiet operation and maximum performance. Motors are suitable for continuous operation. Includes wire nuts and connector. 4 in plastic duct collar with back draft damper insures quiet operation and prevents drafts from entering the room. White, polymeric grill. Dimensions of 10 in x 10 in. One-piece polymeric wheel. Rated for ceilings insulated to R-40. cULus listed. HVI2100 certified.
|
One-piece polymeric wheel. White polymeric grill. Dimensions 11 in x 10-1/2 in. High-impact polycarbonate lens. 100 W maximum, type A19, medium base bulb, (not included). Rated Type IC for ceilings insulated to R-40. Plastic collar for 4 in duct connection, comes complete with built-in non-metallic back draft damper for quiet operation. UL listed. HVI2100 certified. Fan and light can be wired to operate separately.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
One-piece polymeric blower wheel. White polymeric grill. Dimensions of 10 in x 10 in. One 250 W maximum, type R40 bulb, medium base infrared lamp to deliver silent heat to the room, bulb not included. Rated type IC for ceilings insulated to R-40. Plastic collar for 4 in duct connection comes complete with built-in non-metallic back draft damper for quiet operation. UL listed. HVI2100 certified.
|
The high-performance exhaust fan Series feature a unique snap-in-installation system. Installs in ceiling. The durable high-impact plastic housing ensures quiet operation and maximum performance. Motors are suitable for continuous operation. Includes wire nuts and connector. 4 in plastic duct collar with back draft damper insures quiet operation and prevents drafts from entering the room. White, polymeric grill. Dimensions of 10 in x 10 in. One-piece polymeric wheel. Rated for ceilings insulated to R-40. cULus listed. HVI2100 certified.
|
Polymeric grill secured in place via screw mounting through the light housing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UL 181, Class 1 air connector label for general venting. Multiply design of metalized polyester with 1 in pitch steel wire support.
|
Imperial R2 Roof Vent Cap, Steel, Galvanized, Black, Dimensions: 6 in Dia x 12-3/4 in H x 10-3/4 in W
|
Grill is 13-1/2 in Dia. Ribbed frosted glass light lens. 2 to 60 W maximum, type A19, medium base bulbs, bulbs not included. One-piece polymeric wheel. Plastic duct collar for 4 in duct connection, comes complete with built in non-metallic back draft damper for quiet operation. Rated Type IC for ceilings insulated to R-40. UL listed. HVI2100 Certified.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Grill is 13-1/2 in Dia. Ribbed frosted glass light lens. 2 to 60 W maximum, type A19, medium base bulbs, bulbs not included. One-piece polymeric wheel. Plastic duct collar for 4 in duct connection, comes complete with built in non-metallic back draft damper for quiet operation. Rated Type IC for ceilings insulated to R-40. UL listed. HVI2100 Certified.
|
Excellent ASHRAE 62.2 ventilation solution. Includes 6 watt, GU24 LED lamp and provides about the equivalent of 100 watts of incandescent lighting. Includes exhaust fan housing, blower (motor), grill, snap-in bracket, and a 4" round duct collar with a plastic damper which protects against back drafts and ensures quiet operation, and instruction sheets. UL Listed for installation over a tub or shower on a GFCI circuit.
|
At the highest point the grill projects only 1/2 in down from the ceiling. The electronically balanced centrifugal blower wheel assures maximum ventilation at the minimum sound. Easily installed using the adjustable hanging brackets for 16 in centers. Motors are suitable for continuous operation. 4 in plastic duct collar with back draft damper. UL listed for installation over a tub or shower on a GFCI circuit. HVI2100 Certified.
|
|
|
