Home > PLUMBING > ROUGH PLUMBING SUPPLIES > SOLVENTS & SEALERS
Choose a sub category:
PIPE CEMENTS PIPE CLEANERS & PRIMERS THREAD SEALANT COMPOUNDS
THREAD SEALANT TAPES GAS LEAK DETECTORS PLUMBERS PUTTY
PLUMBING EPOXYS
Sort By:
1 2 3 ... 5
Harvey's 017072B-500 Pipe Thread Seal Tape Harvey's 017117B Pipe Thread Seal Tape Mintcraft PMB-445 Pipe Seal Tape
Harvey Thread Seal Tape, Non-Flammable, 1/2 in Width, 260 in Length, 0.003 in Thickness, PTFE Backing, White/Blue Spool, -450 to 500 deg F, Standards: Federal Specification T-27730A, UL Listed, 0.4 g/cc Density, For Wide Range of Threaded Pipe Harvey Thread Seal Tape, Non-Flammable, 1/2 in Width, 520 in Length, 0.003 in Thickness, PTFE Backing, White/Red Spool, -450 to 500 deg F, Standards: Federal Specification T-27730A, UL Listed, 0.4 g/cc Density, For Wide Range of Threaded Pipe Mintcraft Plumbers Tape, 1/2 in Width, 300 ft Length, PTFE Backing, For Fixes Leaks and Loose Pipes
Plumb Pak 04151 Pipe Thread Seal Tape Harvey's 043010 Plumbers Putty Harvey's 017209B Pipe Thread Seal Tape
Plumb Pak Thread Seal Tape, 1/2 in Width, 520 in Length, PTFE Backing, For Threaded Pipe Harvey's Plumbers Putty, Professional Grade, 14 oz Capacity, Can Packing, 20 g/l VOC, >500000 cP Viscosity, Solid, Off-White, Slight Odor/Scent, >212 deg F Flash Point, Media: Water Fog, Foam, Dry Chemical Powder and Carbon Dioxide, Composition: Limestone, Polyester Plasticizer, Polyethylene, Propylene Glycol, Crystalline Silica, Curing Method Harvey Thread Seal Tape, Non-Flammable, 3/4 in Width, 260 in Length, 0.003 in Thickness, PTFE Backing, White/Blue Spool, -450 to 500 deg F, Standards: Federal Specification T-27730A, UL Listed, 0.4 g/cc Density, For Wide Range of Threaded Pipe
Harvey 030005-144 Pipe Thread Compound Harvey's 023015-48 Pipe Joint Compound Harvey's 017252-144 Pipe Thread Seal Tape
Harvey Pipe Thread Compound, Harvey, 1-1/4 oz Capacity, Pack Packing, Solid Stick, Off-White, Odorless Odor/Scent, 500 deg F Flash Point, Media: Carbon Dioxide, Dry Chemical, Foam, Water, 350 deg F, 2000 psi, Resists: Rust and Corrosion Harvey Pipe Thread Compound, 1 oz, Tube, 86 g/l VOC, 30000 cPs Viscosity, Liquid Paste, White, Petroleum Odor/Scent, 153 Deg F Flash Point, Media: Carbon Dioxide, Dry Chemical Powder, Foam and Water Fog, Composition: Calcium Carbonate, Oxidized Soy Bean Oil, 2-Butoxyethanol, Polyfluoroethylene, Alkyl Quaternary Ammonium Bentonite, Titanium Dioxide, Crystalline Silica (Quartz), 1.67 Specific Gravity, Applicable Materials: PVC, CPVC, ABS, Polypropylene and Nylon, -50 To 400 Deg F, 3000 psi For Gas, 10000 psi For Liquid, Standards: UPC Listed, NSF Approved, For Plastic or Metal Threaded Pipe Carrying Water, Steam and Caustics or Dilute Acid Harvey PTFE Pipe Seal Tape, 3/4 in Width, 520 in Length, 0.003 in Thickness, -400 to 500 deg F, For Oxygen Systems
Harvey's 044010 Epoxy Putty Oatey 31229 Great White TAPE SEAL PTFE 1X520
Harvey's Epoxy Putty, 1.3 oz Capacity, Stick Packing, <0.1 % VOC, Solid, Gray/Beige, Sulfurous Odor/Scent, Composition: Bisphenol-A-(Epichlorhydrin), 2,4,6-Tris(Dimethylaminomethyl)Phenol and Crystalline Silica Non-Respirable, Applicable Materials: Wood, Glass, Masonry, Ceramics and Many Plastics, Curing Method, Mixing Ratio, Mixing Style, Resists Oatey, Great White Pipe Joint Compound, 1 oz, Tube, 3 g/l VOC, 25000 cP Viscosity, Liquid Paste, White, 4 hr Drying Time, Odorless Odor/Scent, >212 Deg F Flash Point, Media: Water Fog, Foam, Dry Chemical Powder, Carbon Dioxide, Composition: Calcium Carbonate, Distillates (Petroleum), Hydrotreated Heavy Naphthenic, Polyfluoroethylene, Titanium Dioxide, Crystalline Silica, Flammability Rating: 0, 1.5 Specific Gravity, -50 To 500 Deg F For Liquid, -50 To 400 Deg F For Gas, 10000 psi For Liquid, 3000 psi For Gas, Standards: NSF, IAPMO Listed, For Water, Steam, Caustics or Dilute Acid Lines of PVC, CPVC, ABS, Cycolac, Polypropylene, Iron, Steel or Copper 0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A.
Oatey 31166 Plumbers Putty Harvey's 039300 Gas Leak Detectors Oatey 31402D Water Line Thread Seal Tape
Oatey Plumbers Putty, 14 oz Capacity, Plastic Container Packing, 20 g/l VOC, >500000 cP Viscosity, Solid, Off-White, Mild Petroleum Odor/Scent, >212 deg F Flash Point, Media: Water Fog, Foam, Dry Chemical Powder and Carbon Dioxide, Composition: Limestone, Distillates (Petroleum), Hydrotreated Heavy Naphthenic, Crystalline Silica, 2 Specific Gravity HARVEY'S Gas Leak Detector, All-Purpose, Composition: Propylene Glycol , Water and Lauramine Oxide, 2 oz Container, Liquid, Blue, -55 TO 160 deg F, 212 deg F Boiling Point, 7.2 pH, 550 g/l VOC Oatey Thread Seal Tape, Water-Line, 1/2 in Width, 260 in Length, 0.003 in Thickness, PTFE Backing, Pink, 1600 - 3000 psi Tensile, -450 to 500 deg F, Standards: Military Specification T-27730A, 1.35 - 1.5 g/cc Density, For Piping in Air, Water, Sewage, Hydraulic Lines and Sprinkler System
Harvey's 017065 Pipe Thread Seal Tape Harvey's 017165-144 Pipe Thread Seal Tape Rectorseal 23710 T-Plus 2 Pipe Thread Sealant
Harvey Thread Seal Tape, Non-Flammable, 1/2 in Width, 260 in Length, 0.0035 mil Thickness, PTFE Backing, Yellow, 10000 psi Tensile, -450 to 500 deg F, Standards: Federal Specification T-27730A, UL Listed, For Gas Line Application Recommended Leak Proof Sealant For Lines Carrying Natural Gas, Propane, Butane and Water, Oil and Chemical Installations Harvey Thread Seal Tape, Non-Flammable, 1/2 in Width, 1296 in Length, 0.003 in Thickness, PTFE Backing, White/Blue Spool, -450 to 500 deg F, Standards: Federal Specification T-27730A, UL Listed, 0.4 g/cc Density, For Wide Range of Threaded Pipe RectorSeal T Plus 2 Pipe Thread Sealant, Multi-Purpose, 1.75 oz, Tube, 0 g/l VOC, 170000 cp Viscosity, Paste, White, Slight Odor/Scent, 300 Deg F Flash Point, Media: Foam, Dry Chemical, Carbon Dioxide or Water Fog, Flammability Rating: 1, 1.32 Specific Gravity, 20 - 140 Deg F Application, Applicable Materials: Galvanized Steel, Iron, Brass, Copper, Aluminum, Stainless Steel, Polyethylene, Fiberglass-Reinforced, PVC, CPVC and ABS Pipe, -40 To 300 Deg F, 2000 psi For Gas, 10000 psi For Liquid, Standards: Certified To NSF/ANSI Standard 61, Annex  G, TT-S-1732, FBC, ULC Listed, For Potable Water Systems
Harvey's 029035 Pipe Thread Compound Oatey 31403 Gas Line Thread Tape Oatey 30779 All Purpose Pipe Cleaner
Oatey Pipe Thread Compound, 8 oz, Brushtop Plastic Jar, 11 g/l VOC, Liquid Paste, Gray, Slight Odor/Scent, >199 Deg F Flash Point, Media: Dry Chemical, Carbon Dioxide, Water Spray, Alcohol-Resistant Foam, Composition: Calcium Carbonate, Distillates (Petroleum), Hydrotreated Middle, Linseed Oil, Crystalline Silica, Quartz, Flammability Rating: 1, 1.68 Specific Gravity, Standards: NSF Approved, For Pipe Joint Threads on Lines Carrying Water, Steam, Air or Natural Gas Oatey Thread Seal Tape, Gas Line, 1/2 in Width, 260 in Length, 0.004 in Thickness, PTFE Backing, Yellow, 1245 - 2500 psi Tensile, -450 to 500 deg F, Standards: Military Specification T-22230A (ASG), UL 31 RO, AGA 3226 and Can/ULC-S642, 1.35 - 1.5 g/cc Density, For Galvanized Steel, Iron, Brass, Copper, Aluminum, Stainless Steel, Polyethylene, Polypropylene, PVC, CPVC, ABS and Fiberglass Threaded Piping Oatey All Purpose Pipe Cleaner, Series: 30779, 4 oz Capacity, Can Packing, Liquid, Clear, Acetone Odor/Scent, Composition: Acetone, Methyl Ethyl Ketone, 0.82 at 20 deg C Specific Gravity, 0 - 4 deg F Flash Point, 510 g/l VOC, -15 TO 110 deg F, Applicable Materials: PVC, CPVC and ABS, Lo-VOC (SCAQMD) 1168/316A, BAAQMD Method 40, NSF Approved
Oatey 30999 ABS Cement Rectorseal 55910 PVC/CPVC Primer/Cleaner Oatey 30755 PVC/CPVC Primer
Oatey Solvent Cement, Medium Bodied, 32 oz Capacity, Can, 325 g/l VOC, 500 cPs Viscosity, Liquid, Black, 5 - 6 Min at 30 - 50 Deg F, 3 - 4 Min at 50 - 70 Deg F, 1 - 2 Min at 70 - 90 Deg F Setting, 2 hr Functional Cure, Solvent Odor/Scent, 14 - 23 Deg F Flash Point, Media: Dry Chemical, Carbon Dioxide, Foam and Water, Composition: Methyl Ethyl Ketone, ABS Resin, Acetone, Flammability Rating: 1.8 LFL, 11.8 UFL, 0.89 Specific Gravity, 40 - 110 Deg F Application, Applicable Materials: ABS, Application Method: Bristle Brush or Roller, 800 psi For 48 hr Shear, Standards: ASTM D2235, SCAQMD 1168/316A, BAAQMD Method 40, NSF, IAPMO Listed, For All Non-Pressure Applications Jim Hi-Etch Primer, 1/4 pt, Liquid, Purple, Pungent Odor/Scent, Application Method: Bristle Brush, <1 Specific Gravity, 4.1 Deg F Flash Point, 550 g/l VOC, 40 - 120 Deg F, Suitable For Use With: PVC and CPVC Pipe, Tubing and Socket Type Fittings, Standards: NSF Approved, UPC (IAPMO) Listed, Meets ASTM F 656, LEED Compliant, For Potable Water, Pressure Pipe, Gas, Conduit, Sewers and DWV Systems Oatey Primer, 4 oz, Pail, Liquid, Purple, Solvent Odor/Scent, Application Method: Natural Bristle Brush or Roller, 14 - 23 Deg F Flash Point, 505 g/l VOC, -15 to 110 Deg F, Suitable For Use With: All Schedules and Classes Of CPVC and PVC Pipe and Fittings, Standards: Meets ASTM F-656, NSF and IAPMO Listed, Used to Removes Surface Dirt, Grease and Grime, As Well As Softens The Pipe Surface to Allow a Fast, Secure Solvent Weld
Oatey 30890 Rain-R-Shine Oatey 31012 PVC Cement Plumb Pak PP854-2 Pipe Joint Compound
Oatey Solvent Cement, Series: Rain-R-Shine, Medium Bodied, 4 oz Capacity, Can, 510 g/l VOC, 500 cPs Viscosity, Liquid, Blue, 4 - 5 Min at 30 - 50 Deg F, 3 - 4 Min at 50 - 70 Deg F, 1 - 2 Min at 70 - 90 Deg F Setting, 2 hr Functional Cure, Solvent Odor/Scent, 14 - 23 Deg F Flash Point, Media: Dry Chemical, Carbon Dioxide, Foam and Water, Composition: Tetrahydrofuran, Cyclohexanone, Acetone, PVC, Methyl Ethyl Ketone, Silica, Amorphous, Fumed, Crystalline Free, Flammability Rating: 1.8 LFL, 11.8 UFL, 0.94 Specific Gravity, 40 - 110 Deg F Application, Applicable Materials: PVC, Application Method: Bristle Brush or Roller, 250 psi For 2 hr, 500 psi For 16 hr, 900 psi For 72 hr Shear, Standards: ASTM D2564, SCAQMD 1168/316A, BAAQMD Method 40, NSF, IAPMO Listed, For Pool, Irrigation, Potable Water, Pressure Pipe, Conduit and DWV Oatey Solvent Cement, Regular Bodied, 4 oz Capacity, Can, 510 g/l VOC, 90 cPs Viscosity, Liquid, Clear, 6 - 7 Min at 30 - 50 Deg F, 4 - 5 Min at 50 - 70 Deg F, 1 - 3 Min at 70 - 90 Deg F Setting, 2 hr Functional Cure, Solvent Odor/Scent, 14 - 23 Deg F Flash Point, Media: Dry Chemical, Carbon Dioxide, Foam and Water, Composition: Tetrahydrofuran, Methyl Ethyl Ketone, Cyclohexanone, Acetone, PVC (Chloroethylene, Polymer), Flammability Rating: 1.8 LFL, 11.8 UFL, 0.9 Specific Gravity, 40 - 110 Deg F Application, Applicable Materials: PVC, Application Method: Bristle Brush or Roller, 250 psi For 2 hr, 500 psi For 16 hr, 900 psi For 72 hr Shear, Standards: ASTM D2564, SCAQMD 1168/316A, BAAQMD Method 40, For Potable Water, Pressure Pipe, Conduit and DWV Plumb Pak Pipe Joint Compound, 2 oz, Tube Packing
Rectorseal 25790 Pipe Thread Sealant Harvey's 018100-24 P-4 Oatey 30883 PVC Cement
RectorSeal No. 5 Pipe Thread Sealant, Multi-Purpose, 1.75 oz, Tube, 317 g/l VOC, 40000 cp Viscosity, Paste, Yellow, Mild Odor/Scent, 150 Deg F Flash Point, Media: Foam, Dry Chemical, Carbon Dioxide or Water Fog, Flammability Rating: 2, 1.38 Specific Gravity, 20 - 140 Deg F Application, Applicable Materials: Threaded Galvanized Steel, Iron, Brass, Copper, Aluminum, Stainless Steel, Polyethylene, Fiberglass-Reinforced And PVC Pipe, -50 To 400 Deg F, 2600 psi For Gas, 12000 psi For Liquid, Standards: SSA, UPC File No 1282, FBC, ULC Listed, NSF/ANSI 61-G/372, Federal TT-S-1732, For Potable Water Systems Harvey Solvent Cement, Series: P-4, Fast Set, Regular Bodied, 4 oz Capacity, Dauber Can Packing, 488 g/l VOC, 90 cPs Viscosity, Translucent Liquid, Clear, 6 - 7 min at 30 - 50 deg F, 4 - 5 min at 50 - 70 deg F, 1 - 3 min at 70 - 90 deg F Setting, 2 hr Functional Cure, Solvent Odor/Scent, -4 deg F Flash Point, Media: Alcohol Resistant Foam, Water Fog, Dry Chemical Powder, Carbon Dioxide, Composition: Methyl Ethyl Ketone, Cyclohexanone, Acetone, Polyvinyl Chloride, Flammability Rating: 3, 0.9+/-0.02 Specific Gravity, 40 - 110 deg F Application, Applicable Materials: PVC, Application Method: Bristle Brush or Roller, 250 psi For 2 hr, 500 psi For 16 hr, 900 psi For 72 hr Shear, Standards: ASTM D2564, SCAQMD 1168/316A, BAAQMD Method 40, For Potable Water, Pressure Pipe, Conduit and Drain, Waste and Ventilation Applications Oatey Solvent Cement, Medium Bodied, 4 oz Capacity, Can Packing, <510 g/l VOC, 500 cPs Viscosity, Liquid, Gray, 5 - 6 min at 30 - 50 deg F, 3 - 4 min at 50 - 70 deg F, 1 - 2 min at 70 - 90 deg F Setting, 2 hr Functional Cure, Ether Like Odor/Scent, 14 - 23 deg F Flash Point, Media: Dry Chemical, Carbon Dioxide and Foam, Composition: Tetrahydrofuran, Acetone, Methyl Ethyl Ketone, PVC (Chloroethylene, Polymer), Cyclohexanone, Silica, Amorphous Fumed Silica, Flammability Rating: 3, 0.93 Specific Gravity, 40 - 110 deg F Application, Applicable Materials: PVC, Application Method: Bristle Brush or Roller, 250 psi For 2 hr, 500 psi For 16 hr, 900 psi For 72 hr Shear, Standards: ASTM D2564, SCAQMD 1168/316A, BAAQMD Method 40, For Potable Water, Pressure Pipe, Conduit and DWV
   
 
1 2 3 ... 5