|
|
|
|
|
|
|
|
|
|
|
|
|
|
For grinding or buffing. Right hand thread only.
|
For grinding or buffing. Right hand thread only.
|
Universal dust bag fits all Dewalt miter saws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Time-saving and accurate saw fence micro-adjuster. Allows you to dial-in precise adjustments easily with one hand to your Kreg Precision router table or Precision band saw down to .005". Easy to grip ribbed dial. Black plastic fixing knob. Dimensions: 7" x 2" x 5".
|
Provides a consistent and optimum pressure. Made from a durable plastic composite body. Comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more.
|
Use to hold trim at the angle required, eliminating the need for advanced compound miter cuts and difficult 'coping'. Curved design compensate for a wide variety of crown molding spring angles, and its extension arms let you work with crown up to 5-1/2" wide with a 12" saw and 3-1/2" wide with a 10" saw.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Roller support stand,black shiny finish, with yellow plastic adjustable roller handle. Open range size, 7-1/8" W x 26-9/16" , 42-1/2" H, zinc plated roller, 11-1/4" W x 1-7/8" Dia. x 0.039 (1.0mm), folding size, 29-3/4" L x 17-1/8" W x 2-3/4" H, square feet tube, 21" L x 1-3/16" W x 0.059" (1.5mm), load capacity, 198 lbs.
|
Used to accurately position crown molding vertically against saw fence at exactly the same angle for every cut. Includes: (2) stops, one for each side of blade.
|
Add safety and convenience to your Precision Router Table with this incredibly handy power switch. Features a 2 plug design which allows it to control two independent devices at once. Key-Lok which eliminates accidental power-on, and a long 8' heavy-duty 14 gauge power cord. 15amp, 120v.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Leg stand for the RK7136.2 (711.6411) miter saw. 4 easily attached legs allow users to accurately and safely use the miter saw away from the work bench. Legs slide into pockets in the miter saw base and secure with large thumb screws. Leg stand includes rolling material supports that attach to a 2" x 4" (Not Included). The rolling material supports also include material stops for repetitive cuts.
|
Lightweight and durable steel stand has adjustable height and folds for transport. For use with No.D24000 (770.2525).
|
Add true mobility to your Universal Steel stand. Includes (4) heavy-duty casters. Dual-locking mechanism protects against caster roll and pivot. Includes all necessary hardware.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Table saw stand for Worm Drive table saw. The portable jobsite Worm drive table saw stand is made exclusively for (8889081) . Set-up for the job is quick and easy with tool-less latches to secure the table saw. Designed for portability, weighing only 14 lbs.
|
Folds for easy storage. Portable, lightweight and durable. Fits No.DW745 (SKU 281.2428) jobsite table saw.
|
Portable tile saw stand for No.MK370 EXP model tile saw; weighs 3.1 lbs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Exclusively designed for use with the Bosch GTS1041A REAXX 10 inch jobsite table saw (8916587). The cartridge is part of the saw's Active Response Technology, which imparts a low-voltage electrical signal onto the blade. The signal alters upon contact with the user's skin, triggering a chemical reaction in an activation cylinder similar to the deployment of an airbag in an automobile. In this case, instead of deploying and airbag, the chemical reaction fires a piston that pushes against the drop arm. This action rapidly forces the saw blade down and away from the operator, mitigating serious user injury. Each cartridge allows for two activation s before replacement is needed. Additional onboard cartridge storage is located onboard the tool. After activation, the system can be reset in less than 60 seconds. Each of the dual-activation cartridges has been designed to have a 20 year shelf life and each has an expiration date printed on it. The dual-activation cartridge works with standard 10 inch fine finish and construction-grade blades and stacked dado blades. Includes 1 Dual-Activation Cartridge.
|
Heavy-duty all steel construction, stand supports up to 400 lbs. Universal design accommodates all brands of miter saws, including 12" sliding miter saws. Quick-release mounting brackets for easy miter saw mounting and removal. Tool-free adjustment of material supports and extension arms. Material supports include rollers and positive stops for repetitive cuts. Weighs 41.8 lbs.
|
This adjustable and durable table is built to last. Comes equipped with levelers to compensate for uneven floors. The stand has predrilled holes that make it easy to mount accessories and to customize the stand. Versatile, system-ready design for all Kreg table top solutions, including the Klamp Table and the Precision Router Table Top. You can also use it to create a custom tool or work stand for your shop. Made from heavy 12 and 16 gauge steel and can be adjusted from 31" to 39: (78.7 cm to 99.1 cm) in height. Includes (4) leveling feet and assembly hardware. Combine with the Router Table Top (5100797) and the Router Table Fence (5823109) to assemble into the PRS1045 Router Table.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rolling table saw stand weighs only 33lbs. Heavy-duty kick stand allows the stand to balance upright for mobility and storage. Wide stand base and offset rear legs provide stability and support for material feed control. Heavy-duty aluminum construction withstands loads up to 200 lbs. Rubber feet keep the stand from sliding on smooth surfaces. Table top height provides the user ideal table top positioning for a wide variety of table saw applications.
|
High performance router table with insert plate. This rugged MDF table top provides a solid, secure routing solution for any workshop. A 1" thick (25mm) MDF core provides a flat, solid top that absorbs vibrations, while steel reinforcing struts prevent sagging; even under the weight of heavy routers and lifts. Durable, high pressure laminate skin offers a low-friction Easy-Slide surface, making it easy to slide work pieces across the surface. Thick edge banding protects the top against bumps and abrasions. Pre-drilled top with holes for Precision Insert-Plate Levelers. Includes (1) Industrial duty Router Table Top, (1) Insert Plate with 3 Level-Lock rings, ring wrench and starting pin, (4) Precision Insert Plate Levelers, (1) Miter Gauge/T-Slot Track, (2) Steel reinforcing struts, and (1) Hardware set and owner's manual. Combine with the Router Table Base (5100789) and the Router Table Fence (5823109) to assemble into the PRS1045 Router Table.
|
Universal design works with all brands of miter saws. Lightweight aluminum construction, 5-1/2 ft. beam extends to support up to 16 ft. of material and up to 400 lbs. Legs provide support and fold for easy storage. Work stops/supports can be repositioned quickly anywhere along the rail. Non-marring feet, Miter Saw Not Included. Includes: (1) heavy duty miter sawstand, (2) convertible work supports/stops and (2) mounting brackets.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This anodized-aluminum fence features a table saw-style T-square adjustment system that ensures the fence will always stay parallel to the miter gauge slot. The fence adjusts easily with just one hand and locks firmly in place with dual locks. A large paddle lock on the in-feed end and a quarter-turn lock on the outfeed end that prevents fence deflection. Combine with the Router Table Top (5100797) and the Router Table Base (5100789) to assemble into the PRS1045 Router Table.
|
Features a full size router table in a compact, portable package. Durable and versatile. Equipped with all new Level-Loc reducing rings that twist into place and lock in level and flush with the plate surface. The plate comes with three rings: 1", 12/16" (for use with Porter-Cable style guide bushings) and 25/8". Markings make it easy to center and mount any router. Heavy-duty aluminum fence with new clamps that allow quick, confident fence adjustment. Just flip the cams up, move the fence, and then flip the cams back down to lock the fence in place.
|
Wide adjustable infeed and outfeed roller work supports provide up to 8' of material support. Adjustable mounting rails adapt to nearly any miter saw or portable thickness planer. Wide rubber grip wheels provide jobsite mobility. 3-position pneumatic assisted raising and lowering for the ultimate in flexibility and ease of set up. Durable tubular steel constriction allows for a 300 lb max weight capacity. Compact vertical storage. Weighs 67 lbs. Miter Saw Not Included.
|
|
|
