|
|
|
|
|
|
|
|
|
|
|
|
|
|
This riser is made of durable polyethylene and conveniently molded so it can be easily cut to the desired length during installation.
|
Made of durable high-impact plastic to ensure long life, these fittings have sharp spiral barbs that eliminate the need for glue and clamps. Quickly and simply insert the fittings by hand into 1/2 in riser flex pipe and you are done.
|
Riser flex fittings come in many sizes and varieties to add versatility to your sprinkler system. The fittings are durable as the flexible plastic is less likely to break on impact and the spiral barbs fasten to the riser flex pipe eliminating the need for glue and clamps.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of durable high-impact plastic to ensure long life, these fittings have sharp spiral barbs that eliminate the need for glue and clamps. Quickly and simply insert the fittings by hand into 1/2 in riser flex pipe and you are done.
|
Made of durable high-impact plastic to ensure long life, these fittings have sharp spiral barbs that eliminate the need for glue and clamps. Quickly and simply insert the fittings by hand into 1/2 in riser flex pipe and you are done.
|
Made of durable high-impact plastic to ensure long life, these fittings have sharp spiral barbs that eliminate the need for glue and clamps. Quickly and simply insert the fittings by hand into 1/2 in riser flex pipe, and you are done.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This riser is made of molded plastic. It can be cut to the desired length and is not for use under continuous pressure.
|
EZ male pipe thread and spiral barbed adapter allow for easy inline connection of EZ pipe to PVC pipe or sprinkler head. Can also be used for extension of two or more lengths of EZP tubing.
|
This shrub head has a durable plastic insert nozzle and a 1/2 in. FNPT inlet. The plastic nozzle is designed with a 15 ft full spray pattern. This shrub head is also designed with a filter that prevents debris from clogging it.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Spiral barbed tee allows for easy 3-way connection of Rain Bird EZP tubing for sprinkler systems.
|
This riser is made of durable polyethylene and conveniently molded so it can be easily cut to the desired length during installation.
|
This riser is an extension to the cut-off riser and is made of flexible plastic composition that allows constant bending without breaking. It can be cut to the desired length and is not for use under continuous pressure.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Swing Pipe Elbow, 1/2 in Connection, FNPT Connection, 2-1/4 in W, 1.06 in D, 1.13 in H, Polyoxymethylene, Black, 80 psi, Temperature Rating: 110 deg F
|
Rain Bird Pipe Elbow, Flex, 1/2 in Connection, MNPT x FNPT Connection, 2 in W, 1.13 in D, 1-1/2 in H, Plastic/Polyethylene, Black
|
Rain Bird Pipe Elbow, Flex, 3/4 in Connection, MNPT x FNPT Connection, 2.31 in W, 1.39 in D, 1.81 in H, Plastic/Polyethylene, Black
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Swing Pipe Coupling, 1/2 in Connection, Barb Connection, 2.12 in W, 1/2 in D, 0.56 in H, Polyoxymethylene, Black, 80 psi, Temperature Rating: 110 deg F
|
Rain Bird Elbow, 3/4 x 1/2 in Connection, MNPT x Barb Connection, Polyethylene, Black, Temperature Rating: 35 deg F
|
This riser is made of flexible plastic composition that allows constant bending without breaking. It can be cut to the desired length and is not for use under continuous pressure.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Convert existing 1/2 in underground sprinkler systems to low flow watering where a drip circuit can't be set up. Adjustable bubblers are available in stream spray with a maximum spray diameter of 3 ft at 30 psi or for finer water droplets, a fan spray, with spray diameter up to 13 ft at 30 psi. Bubbler flow rates are adjustable from 0 to 13 gph at 30 psi for stream type and from 0 to 24 gph at 30 psi for the fan spray. These features allow the higher flow rates required when watering large and small plants on the same circuit.
|
Trusted for decades, Rain Bird? MPR Nozzles simplify the design process by allowing sprinklers with various arcs and radii to be mixed on the same zone while maintaining even water distribution rates. This allows them to spray an equal distance and to provide an equal amount of water to a given area. A wide selection of MPR nozzles is available, so the distribution of water can be tailored to meet the unique and diverse needs of your landscape. MPR nozzles are designed to provide uniform coverage, ensuring that your lawn is green throughout, with no dry or brown spots.
|
Preassembled riser and stake for use with Rain Bird 10 - 32 threaded emission devices.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Stake, 6-3/4 in Length, Plastic, Black, Suitable for: 1/2 in Poly Tubing
|
Rain Bird Hole Punch, Plastic, Black, Suitable for: Drippers, 1/4 in Fittings
|
12 washers tear off sheet for ease.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This shrub head has a durable plastic insert nozzle and a 1/2 in. FNPT inlet. The plastic nozzle is designed with a 15ft full spray pattern. This shrub head is also designed with a filter that prevents debris from clogging it.
|
RAINBIRD? 1300 Series flower bubblers provide a controlled, gentle umbrella of water for irrigating trees, flowers and shrub areas. Mount these bubblers on 1/2 in male risers to effectively water areas from 1 to 3 ft.
|
The Rain Bird EC50 1/2 in end closure is used to close a drip line system without the need of cutting the tubing which can later on be used to extend your irrigation system. Used with 1/2 in tubing or 1/2 in emitter tubing to allow for easy flushing and draining of the system.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Swing Pipe, Specifications: 110 deg F, Dimensions: 2 ft L
|
Compression fitting for use with all 1/2 in drip tubing brands.
|
Easy-to-replace vinyl washers fit any garden hoses, preventing leaks and loose connections.
|
|
|
