|
|
|
|
|
|
|
|
|
|
|
For used with cold water applications, TPV seats NBR O-rings, fits both Schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
|
Plumb Pak Sillcock Faucet Handle, Suitable for: Square Stem
|
The Danco round broach valve handle replaces a lost or stripped handle and improves the operation of the valve. It is designed for use on hose Bibb faucets, sillcocks, stopcocks and valves. It features a metal construction that will endure the rigors of everyday use.
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.
|
The Danco square broach valve handle replaces a lost or stripped handle and improves the operation of the valve. It is designed for use on hose Bibb faucets, sillcocks, stopcocks and valves. It features a metal construction that will endure the rigors of everyday use.
|
For used with cold water applications, TPV seats NBR O-rings, fits both Schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
|
|
|
|
|
|
|
|
|
|
|
|
|
Rated for 150 psi at 73 deg F, for use with cold-water applications, gray color, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. Lead-free compliant.
|
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.
|
Fits most drainable valves. Three styles of caps with washers included.
|
|
|
|
|
|
|
|
|
|
|
|
|
12 point.
|
Plumb Pak Sillcock Faucet Handle, Wheel Handle, Suitable for: 1/4 in Square Stem
|
Rated for 150 psi at 73 deg F, for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
Plumb Pak Coin Air Valve, Metal, Satin Nickel, Dimensions: 2.94 in L x 2 in W x 2.06 in H
|
The V-3 Vacuum Breaker prevents dangerous back-siphonage and backflow into a potable water supply. The V-3 is equipped with a protruding tip device for manual draining of a faucet (after hose removal), which prevents freezing. The V-3 is also available in a chrome-plated version (V-3C). These units are not intended for use where water contamination could occur as a result of draining or for permanent continuous pressure installation. For continuous pressure systems, install the BFP Dual Check Valve.
|
Apollo Valves Stop Valve, 1/2 x 3/8 in Connection, PEX Barb x Compression Connection, Temperature Rating: 180 deg F, Body Material: Brass, Chrome
|
|
|
|
|
|
|
|
|
|
|
|
|
Apollo Valves Stop Valve, 1/2 x 3/8 in Connection, PEX Barb x Compression Connection, Temperature Rating: 180 deg F, Body Material: Brass, Chrome
|
16 point.
|
Fits both SCH 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits both SCH 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.
|
Rated for 150 psi at 73 deg F, for use with cold-water applications, gray color, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. Lead-free compliant.
|
Rated for 150 psi at 73 deg F, for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
For used with cold water applications, TPV seats NBR O-rings, fits both Schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
|
CPVC construction. For use with hot or cold water. Rated for 100 psi at 180 deg F. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with ASTM 2846. Certified to NSF 61.
|
CPVC construction. For use with hot or cold water. Rated for 100 psi at 180 deg F. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with ASTM 2846. Certified to NSF 61.
|
|
|
|
|
|
|
|
|
|
|
|
|
Chrome.
|
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.
|
Plumb Pak Tee Valve Faucet Handle, Suitable for: 12/16 Lawn Faucet or Valve
|
|
|
|
|
|
|
|
|
|
|
|
|
Plumb Pak Shut-Off Valve, 1/2 x 3/8 in Connection, Sweat x Compression Connection, Number of Ports/Ways: 2, Media: Water, Body Material: Brass, Chrome, Dimensions: 4 in W x 5-1/2 in H
|
Chrome.
|
Durable sonic welded thermo-plastic body.
|
|