|
|
|
|
|
|
|
|
|
|
|
Reinforced design, fits Sunbeam SCM2300, 2310, 2320, 2400, 2410, 2420 series (SW2002) and Bionaire BCM7900, BCM7910, BCM7920 series, humidifiers. Antimicrobial treatment helps protect wick filter from the growth and migration of mold, fungus, algae and bacteria. Contains 2 wick filters and filter clips.
|
Simply add to water. Can also be used for fountains.
|
Bacteria treatment - EPA registered. Helps control bacteria and algae buildup and keeps water smelling clean.
|
|
|
|
|
|
|
|
|
|
|
|
|
For use in all types of humidifiers: Cool mist, warm mist, ultrasonic & vaporizers. Antimicrobial treated to prevent the growth of odor causing bacteria & mold. Helps keep tanks clean of hard mineral deposits. Eliminates the need to add chemicals every time you add water to the humidifier tank.
|
Microban antimicrobial product protection. Reinforced for longer life. Holmes filter fits: HM-1730, 1745, 1750 and 2200. Meets original manufacturer's specifications.
|
HEPA - type technology removes up to 99% of airborne pollutants. Traps and Locks 30% more dust and particles from your home. Contains Arm and Hammer baking soda for odor elimination.
|
|
|
|
|
|
|
|
|
|
|
|
|
Round filter with microban. CarbonX filter technology. For use with: HM1855, 1800, 1850, 1845 and 1865.
|
Trapmax filter technology. Antimicrobial protection. Highest capacity output.Fits 300, 500, 700 DP3, D46 and B23 Series.
|
Replacement wicks (filters) for Vornado Vortex Whole Room Humidifiers. Dimensions: 9.75" H x 7.75" W x 3.75" D.
|
|
|
|
|
|
|
|
|
|
|
|
|
Filter has Microban antimicrobial product protection. Fits Holmes filter Nos.HM-3500, 3600, 3640, 3650 and 3655. White Westinghouse Nos.WWHM3300 and WWHM3600.
|
10x the odor fighting power for eliminating unpleasant household odors such as tobacco, smoke, pet odors, dirty laundry and cooking fumes. Uniquely formulated blend of Carbon, Zeolite and Arm and Hammer baking soda for superior and effective odor eliminating results.
|
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
|
|
|
|
|
|
|
|
|
|
|
|
|
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
|
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
|
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
|
|
|
|
|
|
|
|
|
|
|
|
|
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
|
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
|
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
|
|
|
|
|
|
|
|
|
|
|
|
|
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
|
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
|
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
|
|
|
|
|
|
|
|
|
|
|
|
|
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
|
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
|
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
|
|
|
|
|
|
|
|
|
|
|
|
|
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
|
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
|
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
|
|
|
|
|
|
|
|
|
|
|
|
|
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
|
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
|
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
|
|