|
|
|
|
|
|
|
|
|
|
|
|
|
|
Screw mounted on door. 2-1/4 in Dia. Used on old style passage locks. Includes 2 rosettes and installation screws.
|
Replacement spindle for antique style door knob systems and square drive systems. 9/32 in Dia square drive, threaded shaft. 3-1/2 in L. Includes 2 spindles.
|
These vintage style door knobs are constructed of clear fluted glass and come fastened to a satin nickel finished steel base. This set of knobs is designed for indoor use only and it includes a 17/64 in x 3-1/2 in steel spindle with 3/8 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty die-cast housing with brass face and 5-pin tumbler lock. For Kwikset and Weiser locks. Includes 1 key cylinder with trim ring, 2 keys, 1 mounting plate and 2 screws.
|
Glass knobs with die-cast bases and one 17/64 in square spindle. Used on interior latch sets. Fits square drive spindle systems common on antique and vintage door hardware sets.
|
Victorian style 2-3/16 in Dia solid brass knobs. Uses a 9/32 in square drive, fits old style bit key lock systems. Includes spindle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Prosource glass door knobs will add a bright and beautiful touch to your home's doors and add timeless appeal to any home.
|
Mortise caselock with brass-plated faceplate. Case hardened steel housing. Spindle hole accommodates 1/4 to 5/16 in square shaft. Includes 1 mortise caselock assembly, strike plate and installation screws.
|
Prosource brass door knobs will add a bright and beautiful touch to your home's doors and add timeless appeal to any home.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3-13/16 in Dia. For 2-3/8 or 2-3/4 in backset.
|
ProSource Rim deadlocks are designed to be fitted on the door and to throw a bolt to lock the door by using a key. Keyway Type: Kwikset KW1.
|
ProSource Rim night latch has a surface mount, solid brass latch, hold-open button and has brass finish. It has 5-Pin and 2-piece brass material key with nickel finish. KD (key different), Keyway Type: Kwikset KW1, with screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cast steel case lock and keeper. Surface mount design. Brass steel knobs and rosettes. Skeleton key system. Used on non mortise applications. Includes one lock, one keeper, one key rosette, one knob rosette, two knobs and two keys.
|
Cast steel case lock and keeper. Surface mount design. Brass steel knobs and rosettes. Skeleton key system. Used on non mortise applications. Includes one lock, one keeper, one key rosette, one knob rosette, two knobs and two keys.
|
Die-cast locking unit and strike, locks door to jamb to prevent forced entry. Single 5-pin tumbler cylinder. Requires a 1-1/4 in hole. Includes tamperproof shutter guard. Flat strike.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ProSource Lock, Jimmy-Proof, 1 -Cylinder, 5-Pin Cylinder, Kwikset Keyway, Keyed Different Key, Square Corner Strike, Deadbolts Latch, 1-2-3/8 in Door Thickness, Door Handing: Universal, Residential Commercial/Residential, Machine & Wooden Bolt, Brass, Brass, Dimensions: 6 in L x 3 in W x 1-1/2 in D, Includes: Screws, (2) Keys
|
Prosource Jimmy proof locks double cylinder vertical bolt has a brass finish with a shutter guard feature. Ideal for home and office use. Keyway Type: Kwikset KW1.
|
Fluted glass knobs with brass-plated steel trim plates. Case-hardened steel housing. Lock bolt is key activated both inside and outside. May be used for left or right hand installations. Includes 1 mortise caselock assembly, 2 knobs, 2 trim plates, strike plate and installation screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Steel knob with brass plating. For home and office use. Includes trim plate, strike, knob and two keys. Deadbolt locks from both sides. 2-3/8 in backset. 3 in L x 9/16 in W x 3-7/8 in H overall dimensions, 2-9/32 in W x 7-1/16 in L trim plate. Keyway Type: Kwikset KW1.
|
Exterior sectional lever trim for TELL 8300 and 8400 Series panic device, comes with a fixed Schlage "C" cylinder (on applicable functions).
|
Exit device with lip pull trim, baked aluminum enamel, fits doors 28 to 36 in wide.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource panic bar is a stainless steel latch bolt for trouble-free operation. Suitable to use on 1-3/4 in thick door and its easy to install with SC-1 6 pin keying for security.
|
The ProSource panic bar is a stainless steel latch bolt for trouble-free operation. Suitable to use on 1-3/4 in thick door and its easy to install with SC-1 6 pin keying for security. Includes a lever handle.
|
|
|
