Home > FASTENERS > NUTS, BOLTS, SCREWS > CONSTRUCTION SCREWS - PACKAGED
Choose a sub category:
SCREWS - PKG - DRYWALL -COARSE SCREWS - PKG - DRYWALL - FINE SCREWS - PKG- DRYWALL -SELF DR
SCREWS - PKG- DECK - COATED SCREWS - PKG - DECK - SS SCREWS - PKG- COMPOSITE -COAT
SCREWS - PKG- COMPOSITE - SS SCREWS -PKG- TRIM/FINISH -COAT SCREWS - PKG- TRIM/FINISH - SS
SCREWS - PKG- MULTI USE -COAT SCREWS - PKG- MULTI USE -YLW/Z SCREWS - PKG - STRUCTURE -COAT
SCREWS - PKG - LANDSCAPE TIMBE SCREWS - PKG- MTL BLDG -HEX DR SCREWS - PKG- MTL BLDG -HEX PI
SCREWS - PKG- MTL BLDG -FH DRI SCREWS - PKG- CEMENT BOARD SCREWS - COLLATED - DRYWALL
SCREWS - COLLATED - FLOOR -YLW SCREWS - COLLATED - DECK -COAT SCREWS - COLLATED- CEMENT BOAR
Sort By:
1 2 3
SCREW DECK PHLPS NO7 X 2-1/2IN SCREW DECK PHLPS BGL NO6 X 2IN SCREW DECK PHLPS NO6 X 1-5/8IN
MIDWEST FASTENER Deck Screw, Thread Size: 7 in, 2-1/2 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Phillips, Dacrotized, Package Quantity: 1 PK MIDWEST FASTENER Deck Screw, Thread Size: 6 in, 2 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Phillips, Dacrotized, Package Quantity: 1 PK MIDWEST FASTENER Deck Screw, Thread Size: 6 in, 1-5/8 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Phillips, Dacrotized, Package Quantity: 1 PK
SCREW DECK PHLPS NO6 X 1-1/4IN SCREW DECK PHLPS BGL NO8 X 3IN SCREW DECK PHLPS NO10X3-1/2IN
MIDWEST FASTENER Deck Screw, Thread Size: #6, 1-1/4 in L, Head Type: Bugle, Drive Type: Phillips, Dacrotized, Package Quantity: 1 PK MIDWEST FASTENER Deck Screw, Thread Size: 8 in, 3 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Phillips, Dacrotized, Package Quantity: 1 PK MIDWEST FASTENER Deck Screw, Thread Size: 10-8, 3-1/2 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Phillips, Steel, Dacrotized, Package Quantity: 53 PK, Drive Size: #3, Applicable Materials: Wood
SCREW DECK PHLPS BGL NO8 X 3IN SCREW DECK PHLPS NO8 X 2-1/2IN SCREW DECK PHLPS BGL NO6 X 2IN
MIDWEST FASTENER Deck Screw, Thread Size: #8-8, 3 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Phillips, Steel, Dacrotized, Package Quantity: 82 PK, Drive Size: #2, Applicable Materials: Wood MIDWEST FASTENER Deck Screw, Thread Size: #8-8, 2-1/2 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Phillips, Steel, Dacrotized, Package Quantity: 99 PK, Drive Size: #2, Applicable Materials: Wood MIDWEST FASTENER Deck Screw, Thread Size: #6-8, 2 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Phillips, Steel, Dacrotized, Package Quantity: 168 PK, Drive Size: #2, Applicable Materials: Wood
SCREW DECK PHLPS NO6 X 1-5/8IN SCREW DECK PHLPS NO6 X 1-1/4IN SCREW DECK PHLPS BGL NO6 X 1IN
MIDWEST FASTENER Deck Screw, Thread Size: #6-8, 1-5/8 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Phillips, Steel, Dacrotized, Package Quantity: 205 PK, Drive Size: #2, Applicable Materials: Wood MIDWEST FASTENER Deck Screw, Thread Size: #6-8, 1-1/4 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Phillips, Steel, Dacrotized, Package Quantity: 248 PK, Drive Size: #2, Applicable Materials: Wood MIDWEST FASTENER Deck Screw, Thread Size: #6-8, 1 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Phillips, Point Type: Sharp, Steel, Dacrotized, Package Quantity: 314 PK, Drive Size: #2, Applicable Materials: Wood
SCREW DECK PHLPS BGL NO10X4IN SCREW DECKING FRMG NO8X1-1/4IN SCREW YZ 1# NO10 STAR DRV
MIDWEST FASTENER Deck Screw, Thread Size: 10-8, 4 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Phillips, Steel, Dacrotized, Package Quantity: 51 PK, Drive Size: #2, Applicable Materials: Wood GRK Fasteners Framing and Decking Screw, Thread Size: #8, 1-1/4 in L, Thread Type: Coarse, Head Type: Countersunk, Drive Type: Star, Point Type: Self-Tapping, Steel, Polymer, Package Quantity: 110 PK, Thread Length: 0.826 in, Drive Size: T15, Yellow ProFIT Screw, Thread Size: #10, 4 in L, Head Type: Bugle, Drive Type: Star, Drive Size: T25, Gold, Applicable Materials: Drywall
SCREW DECKING FRMG NO8X1-1/2IN SCREW R4 FRAME/DECK 9X2IN SCREW R4 FRAME/DECK 9X2-1/2IN
GRK Fasteners Framing and Decking Screw, Thread Size: #8, 1-1/2 in L, Thread Type: Coarse, Head Type: Countersunk, Drive Type: Star, Point Type: Self-Tapping, Steel, Polymer, Package Quantity: 110 PK, Thread Length: 1 in, Drive Size: T15, Yellow GRK Fasteners Framing Screw, Thread Size: #9, 2 in L, Head Type: Bugle, Drive Type: Star, Package Quantity: 110 PK, Multi-Purpose, Yellow, Applicable Materials: Cement, Plastic, Wood R4 Multi-purpose framing and decking screws provide a faster drive for improved productivity.
SCREW R4 FRAME/DECK 9X3-1/8IN SCREW STRUCTURAL 1/4X1-1/2IN SCREW R4 FRAME/DECK 10X4IN
GRK Fasteners Framing Screw, Thread Size: #9, 3-1/8 in L, Drive Type: Star, Steel, Package Quantity: 80 PK, Multi-Purpose, Yellow, Applicable Materials: Cement, Plastic, Wood GRK's RSS??? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates. GRK Fasteners R4 Screw, Thread Size: #10, 4 in L, Thread Type: W-Cut, Head Type: Countersunk, Flat, Drive Type: Star, Steel, Climatek, Package Quantity: 50 PK, Multi-Purpose, Thread Length: 2.99 in, Drive Size: T25, Yellow, Applicable Materials: Cement Fiber Board, Particle Board, Plastic, Sheet Metal, Wood
SCREW R4 FRAME/DECK 10X2-1/2IN SCREW R4 FRAME/DECK 10X3-1/8IN SCREW DECK PHLPS BGL NO8 X 3IN
GRK's R4 Self-countersinking screw has a patented underhead with saw-blade like cutting teeth and six self-contained cutting pockets. Together they act similar to a circular saw-blade, transporting the drill dust away from the edge of the screw hole while cutting a perfectly clean hole into even the most brittle materials without cracking any surface treatment. This design enhances the R4s versatility by allowing the fastener to countersink into even the hardest woods. The head of the screw closes the hole off with precision, leaving no damaged fibers around the head. R4 screws 3-1/8 and longer have a four threaded CEE thread. This enlarges the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily. It increases the screw's drawing strength and reduces the friction on the screw shank that lowers the driving torque. GRK Fasteners R4 Framing and Decking Screw, Thread Size: #10, 3-1/8 in L, Head Type: Bugle, Drive Type: Star, Steel, Climatek-Coated, Package Quantity: 70 PK, Drive Size: T-25, Yellow, Applicable Materials: Cement, Fiber, Melamine, Plastic, Sheet Metal, Wood, Includes: Driver Bit MIDWEST FASTENER Deck Screw, Thread Size: #8, 3 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Phillips, Steel, Dacrotized, Package Quantity: 272 PK, Drive Size: #3
SCREW LOW PROFILE NO8X1-1/4IN DuraSpin 06B125P Collated Drywall Screw SCREW DCKNG 305SS NO10X2-1/2IN
White-head cabinet screw is for use in interior applications only. GRK's Low Profile Cabinet??? screws are designed specifically for use in cabinet construction and installation. Manufactured in a #8 ga (4 mm) Dia for universal size convenience. Thin enough to prevent most material splitting, while providing sufficient strength to guarantee a secure installation. The washer head design presses flush against any material surface. Builders have discovered that short Cabinet??? screws can be used in vinyl siding installation, which makes this fastener ideal for both interior and exterior applications. The Cabinet??? screw can also be used for light duty framing applications where a smaller diameter shank is necessary, yet a need exists for drawing power delivered by the washer head. Clear zinc finish. For drywall to light steel. Compatible with DCF5000, TY5100, TY5300, D404-14V, D550-18V, TY9000, TY0200, TY0300 tools. PHEINOX??? 305 stainless steel screws are corrosion and stain-resistant, designed to withstand wet environments. Typical applications for 305 stainless are in corrosive environments such as lakes, pools, spas, decks and boardwalks. Compatible with most wood types including cedar, redwood and ipe.
SCREW LOW PROFILE NO8X1-1/2IN SCREW RSS HANDY PAK 5/16X5-1/8 SCREW DECK PHLPS NO8 X 2-1/2IN
White-head cabinet screw is for use in interior applications only. GRK's Low Profile Cabinet??? screws are designed specifically for use in cabinet construction and installation. Manufactured in a #8 ga (4 mm) Dia for universal size convenience. Thin enough to prevent most material splitting, while providing sufficient strength to guarantee a secure installation. The washer head design presses flush against any material surface. Builders have discovered that short Cabinet??? screws can be used in vinyl siding installation, which makes this fastener ideal for both interior and exterior applications. The Cabinet??? screw can also be used for light duty framing applications where a smaller diameter shank is necessary, yet a need exists for drawing power delivered by the washer head. GRK's RSS??? rugged structural screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws which are 3-1/8 in and longer have a six threaded CEE thread that enlarges the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increasing the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates. MIDWEST FASTENER Deck Screw, Thread Size: #8, 2-1/2 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Phillips, Steel, Dacrotized, Package Quantity: 491 PK, Drive Size: #2, Applicable Materials: Wood
   
 
1 2 3