Home > HEATING & COOLING > FIREPLACES & STOVES > STOVE PIPE & ACCESSORIES
Choose a sub category:
CHEMICAL CLEANERS & POLISHES HEAT PROOF CEMENTS & GASKETS INSULATED CHIMNEY PIPE
PELLET VENT PIPE STOVE PIPE - BLACK PELLET PIPE FITTINGS
STOVE PIPE FITTINGS - BLACK MISC STOVE PIPE PARTS CHIMNEY CAPS & JACKS
CHIMNEY PIPE ACCESSORIES CHIMNEY BRUSHES
Sort By:
1
BND LOCK SS 8in ULTR Temp LOG CREOSOTE SWEEPING         SHIELD HEAT STOVE PIPE ELBOW
SELKIRK SURE-TEMP Locking Band, Stainless Steel, For: Chimney Pipe Ignite-O Chimney Sweeping Log, Net Content: 3.1 lb
REDUC PP STV 7 X 6IN 24GA BLK SHIELD HEAT STV PIPE ADJUSTBLE DAMPER BAROMETRC DRFT CTRL 6IN
PP SMK 6IN 12-18IN 6-1/2IN BLK CLEANER GLASS&MASONRY USA 22OZ KIT GSKT ROPE FBRGLS BLK 3/8IN
Used to adjust pipe to desired length. Adjustable from 12 to 18 in, eliminating the need to cut pipe. Includes finishing band. For installed length, subtract 1-3/8 in per joint. Imperial Glass and Masonry Cleaner, Net Content: 22 fl-oz, Trigger, Compositions: Alcohols, Benzenesulfonic acid, C6-12, Disodium Salt, Ethoxylated, Hexadecyl(Sulfophenoxy)-, Liquids, Potassium Hydroxide, Tetrasodium Ethylenediaminetetraacetate, pH Range: >13
KIT GSKT ROPE FBRGLS BLK 1/2IN KIT GSKT ROPE FBRGLS BLK 5/8IN PP CHMNY 8IN 12IN 10IN 1IN SS
The SELKIRK Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specifically designed for today's modern, high-efficiency "airtight" wood stoves. They are designed for gravity (natural draft), non-positive internal pressure venting only. The SCS is usable on any appliance having a power burner (such as an oil furnace) if that appliance operates with neutral or negative draft at its outlet.
PP STV 6IN 48IN 24GA CAP END ROUND BIG NO CRIMP 8IN KT ELL 6IN UL LSTD SURE-TEMP
Used to connect woodstove to entrance of chimney. Crimped end should be oriented toward the stove to allow for condensation and creosote to flow down inside the pipe. Imperial Round End Cap, Black, 24 ga Thick Wall, 8 in Dia, For: Stove Pipe Can be used for fixed offsets of 30 deg slope. Greater angles are prohibited by UL Standard 103 and by the terms of the product listing. Required Locking bands (2 packaged with each elbow kit) are to be used at each joint. Each offset must be resupported. Elbows rotate 360 deg to provide the exact orientation required. Insulated elbows can be used at the same 2 ft air space clearance as chimney sections. Kit includes 2 elbows, 2 locking bands and one interior resupport.
   
 
1