Home > FASTENERS > CHAIN, CABLE, ROPE > CHAIN / ACCESSORIES
Choose a sub category:
CHAIN - PROOF COIL CHAIN - HIGH TEST CHAIN - STRAIGHT LINK
CHAIN - TWIST LINK CHAIN - JACK CHAIN - TWIN LOOP
CHAIN - SASH CHAIN - DECORATIVE CHAIN - PLASTIC
CHAIN - SPECIALTY GRAB HOOKS SLIP HOOKS
CHAIN - COLD SHUTS CHAIN - LAP LINKS CHAIN - QUICK LINKS
CHAIN - SNAP LINKS CHAIN - SWIVELS CHAIN - CLEVIS LINKS
SPECIALTY FARM HITCH PINS ANCHOR SHACKLES
CLEVISES & PINS SNAPS WELDED RINGS
CHAIN HOISTS LOAD BINDERS POWER HOISTS
ROLLER CHAINS & PARTS
Sort By:
1 2 3 ... 22
Campbell 072-4027 Single Jack Chain Speeco 07090100/2702 Standard Tractor Lynch Pin Speeco 07091900/3548 Standard Tractor Lynch Pin
Campbell Single Jack Chain, Trade Size: 16 in, Steel, Zinc, Silver, Material Diameter: 1/16 in, 250 ft L Forged carbon steel for maximum strength. Spring steel snap rings. Zinc-plated to resist rust. Forged carbon steel for maximum strength. Spring steel snap rings. Zinc-plated to resist rust.
Speeco 07090400/2704 Standard Tractor Lynch Pin Speeco 07091500/2709 Standard Tractor Lynch Pin Campbell 072-2002 Decorator Chain
SpeeCo Lynch Pin, Standard, Specifications: 1/4 in Pin Dia, Carbon Steel, Zinc-Plated, Dimensions: 2-1/8 in L x 6-1/2 in W Forged carbon steel for maximum strength. Spring steel snap rings. Zinc-plated to resist rust. Use for hanging plants and lamps, drapery tie-backs. Do not use for overhead lifting.
Campbell T5950124 Repair Lap Link Campbell 075-2023 Double Loop Chain Campbell 075-2426 Double Loop Chain
For connections of chain and attachments (Not for overhead lifting). Do Not exceed working load limit. Campbell Double Loop Chain, Working Load Limit: 255 lb, Trade Size: #2/0, Carbon Steel, Zinc, Silver, Material Diameter: 9/64 in, 350 ft L Campbell Double Loop Chain, Working Load Limit: 255 lb, Trade Size: #2/0, Low Carbon Steel, Zinc, Silver, Material Diameter: 9/64 in, 275 ft L
Speeco 07090800/2698 Tractor Lynch Pin Campbell T7665012 Welded Ring National Hardware 3152BC Lap Link
Forged carbon steel for maximum strength. Spring steel snap rings. Zinc-plated to resist rust. Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 1 in ID, Chain Size: #7, Steel, Nickel-Plated National Hardware 3152BC Lap Link, Working Load Limit: 120 lb, Trade Size: 1/8 in, Steel, Zinc
National Hardware 3152BC Lap Link Baron PC30316P Welded Proof Coil Chain Campbell 072-2027 Double Loop Chain
National Hardware 3152BC Lap Link, Working Load Limit: 225 lb, Trade Size: 3/16 in, Steel, Zinc BARON Proof Coil Chain, Working Load Limit: 800 lb, Trade Size: 3/16 in, 30 Grade, Steel, Zinc, 250 ft L For playground and gymnasium equipment (1/0 and larger), farm and animal chains and many general-purpose applications. Do not use for overhead lifting. The Playground Equipment Association, which has adopted the min of 1/0 Inco coil chain.
Campbell 072-2004 Decorator Chain SHUT COLD ZINC PLATED 3/16IN  Campbell T4900424 Cold Shut
Use for hanging plants and lamps, drapery tie-backs. Do not use for overhead lifting. Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel. Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
Campbell 072-1727 Single Jack Chain Campbell PB072-2827 Single Jack Chain Campbell 072-2087 Double Loop Chain
CHAIN DBL LOOP 2-0 60FT
Our Price: $1.39
Use for fixture and novelty suspension, general utility use not requiring high strength. Warning, do not exceed the working load limits for chain or components. Do not use for overhead lifting or hoisting. Do not use if the chain or components are visibly distorted or worn. Campbell Straight Link Coil Chain, Working Load Limit: 520 lb, Trade Size: #2, Inside Link Width: 0.34 in, Inside Link Length: 1.29 in, Carbon Steel, Zinc, Material Diameter: 0.18 in, 190 ft L, Links per Foot: 9.3 For playground and gymnasium equipment (1/0 and larger), farm and animal chains, and many general-purpose applications. Do Not Use for overhead lifting. *Not Recommended for swing sets; the Playground Equipment Association, which has adopted the min of 1/0 Inco coil chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
Fehr Bros 3/16 Anchor Shackle Campbell AW080-1427 Single Jack Chain Campbell T7665032 Welded Ring
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. Campbell Single Jack Chain, Working Load Limit: 16 lb, Trade Size: #14, Inside Link Length: 0.63 in, Carbon Steel, Zinc, Material Diameter: 0.08 in, 200 ft L, Links per Foot: 19 Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 1-1/4 in ID, Chain Size: #7, Steel, Nickel-Plated
Campbell PG072-2227 Double Loop Chain Campbell T4900324 Cold Shut Campbell T7661152 Welded Ring
For playground and gymnasium equipment (1/0 and larger), farm and animal chains and many general-purpose applications. Do not use for overhead lifting. The Playground Equipment Association, which has adopted the min of 1/0 Inco coil chain. Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 2 in ID, Chain Size: #3, Steel, Nickel-Plated
Campbell T7660841 Welded Ring National Hardware 3152BC Lap Link Baron PC3014P Welded Proof Coil Chain
Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 1-1/4 in ID, Chain Size: #4, Steel, Zinc National Hardware 3152BC Lap Link, Working Load Limit: 500 lb, Trade Size: 1/4 in, Steel, Zinc BARON Proof Coil Chain, Working Load Limit: 1300 lb, Trade Size: 1/4 in, 30 Grade, Steel, Zinc, 141 ft L
   
 
1 2 3 ... 22